Dimensional coordination in wet spaces

Download

007332.pdf

Date

1989

Author

Uzunoğlu, Kozan

Metadata

Show full item record

Item Usage Stats

72
views

0
downloads

URI

https://hdl.handle.net/11511/3671

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Dimensional analysis of the thermomechanical problem arising during through-hardening of cylindrical steel components Şimşir, Caner; Hoffmann, Franz; Zoch, Hans-Werner (Elsevier BV, 2010-09-01) This article concerns the dimensional analysis of the complex thermomechanical problem arising during through-hardening of cylindrical steel components. A complete and independent set of physically based dimensionless numbers was derived using the weak formulation method and the individual effects of dimensionless numbers with sensitive material parameters were investigated by finite element simulations. The results demonstrate potential of the approach in simplification of the model and the identification ...
Dimensional optimization of microchannel heat sinks with multiple heat sources Turkakar, Goker; Okutucu Özyurt, Hanife Tuba (2012-12-01) Dimensional optimization of silicon microchannel heat sinks is performed by minimizing the total thermal resistance. Intel Core i7-900 Desktop Processor of chip core dimensions of 1.891 cm x 1.44 cm is considered as a reference processor which is reported to dissipate 130 W of heat. The properties are evaluated at the area weighted average of the fluid inlet and iteratively calculated outlet temperatures. The effects of the thermal and hydrodynamic entrance regions on heat transfer and flow are also investi...
Dimensional optimization of prismatic folded plates by pattern search. Sübaşı, Hakkı Hasan; Department of Architecture (1979)
Dimensional Design of Dual Mode Waveguide Multiplexers Boyacioglu, Gokhan; Alicioglu, Bulent; Yıldırım, Nevzat (2018-11-02) In this paper, a systematic design procedure is described for manifold type multiplexers formed by the classical circular dual mode waveguide filters. The design procedure starts with cascade synthesis of lumped quadruplet version of the filters with inverter couplings. Then the LC resonators are converted into SC transmission line (SCTL) resonators. The whole circuit is then impedance scaled by inverters at ports for realization of resonators as waveguides with desired cross-sectional dimensions thus formi...
Geometric nonlinearity in R/C frames subject to earthquake loads at ultimate stage Alkan, C Cenk; Atımtay, Ergin; Department of Civil Engineering (1998)

Citation Formats

K. Uzunoğlu, “Dimensional coordination in wet spaces,” Middle East Technical University, 1989.