Development of zeolite filled polycarbonate mixed matrix gas separation membranes

2006-11-20
Sen, Deger
Kalıpçılar, Halil
Yılmaz, Levent
Show full item record
Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
54
views
0
downloads
https://hdl.handle.net/11511/37341
Department of Chemical Engineering, Article

Suggestions

Development of polycarbonate based zeolite 4A filled mixed matrix gas separation membranes
SEN, Deger; Kalıpçılar, Halil; Yılmaz, Levent (2007-10-15)
The incorporation of fillers, blending with multifunctional low molecular-weight additives and their combination are investigated as alternatives for modifying the permselective properties of polymeric gas separation membranes. For this purpose, pure polycarbonate (PC), PC/p-nitroaniline (pNA), PC/zeolite 4A and PC/pNA/zeolite 4A mixed matrix membranes were prepared by solvent-evaporation method using dichloromethane as solvent. Zeolite 4A was the filler and pNA was the low molecular-weight additive with mu...
Development of silica fume-based geopolymer foams
Shakouri, Sahra; Bayer, Özgür; Erdoğan, Sinan Turhan (Elsevier BV, 2020-11-01)
Thermal insulation materials are critical for reducing the energy consumption and carbon emissions associated with buildings. A good insulation material must not only have low density and sufficient mechanical properties but also resist high temperatures and fires. In addition, its production process must be simple and inexpensive. This study describes the production of very low density (>85 kg/m(3)) inorganic foams with high porosity (<94%). Silica fume and NaOH solutions are mixed to prepare a geopolymer ...
Development of manganese-doped hydroxyapatite incorporated PCL electrospun 3D scaffolds coated with gelatin for bone tissue engineering
Samiei, Alaleh; Keskin, Dilek; Evis, Zafer; Department of Biomedical Engineering (2023-1-27)
Combination of polymers and bioceramics has increased their importance in bone tissue engineering (BTE) to treat various defects. Within this frame, in this thesis, it is aimed to develop a 3D gelatin-coated PCL scaffold combined with Mn-doped hydroxyapatite (HA) in order to investigate the effect of the doping element, i.e., the manganese (Mn) ion, on the structural and biological properties of the composite scaffold. Pure and Mn-doped HAs were synthesized using microwave irradiation, and the samples were ...
Development of pan based composite membranes for pervaporation
Okumuş, Emin; Gürkan, Türker; Yılmaz, Levent; Department of Chemical Engineering (1998)
Development of amperometric glucose biosensors based on conducting polymers and different materials providing enhanced performance
Gökoğlan, Tuğba Ceren; Toppare, Levent Kamil; Department of Chemistry (2016)
The main objective of this study is to investigate breakage parameters of a narrow size fraction of coarse particles of a hard mineral when ground in a mixture with fine particles of a soft mineral. For this purpose, quartz and calcite were selected as mixture components varying appreciably in hardness (quartz mohs scale:7 and calcite mohs scale:3) but having quite similar densities. Mixture feeds comprised of -1.18+0.85 mm quartz (hard and coarse) and -106 µm calcite (soft and fine) at various proportions ...
Citation Formats
D. Sen, H. Kalıpçılar, and L. Yılmaz, “Development of zeolite filled polycarbonate mixed matrix gas separation membranes,” DESALINATION, pp. 222–224, 2006, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/37341.
METU IIS - Integrated Information Service open@metu.edu.tr