Design elements and performance of a rotary dryer working under diffusion range of drying.

Date

1968

Author

Kısakürek, Bilgin

Metadata

Show full item record

Item Usage Stats

67
views

0
downloads

URI

https://hdl.handle.net/11511/3833

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Design and thermo-mechanical analysis of warm forging process and dies Saraç, Sevgi; Gökler, Mustafa İlhan; Department of Mechanical Engineering (2007) Forging temperature is one of the basic considerations in forging processes. In warm forging, the metals are forged at temperatures about the recrystallization temperature and below the traditional hot forging temperature. Warm forging has many advantages when compared to hot and cold forging. Accuracy and surface finish of the parts is improved compared to hot forging while ductility is increased and forming loads are reduced when compared to cold forging. In this study, forging process of a part which is ...
Design optimization of a 2-d scramjet inlet Başaran, Mehmet; Leblebici, Engin; Tuncer, İsmail Hakkı (2019-05-14) A generic 2-D scramjet inlet is analyzed with SU2 software. Accuracy of three turbulence models are compared and a mesh dependence study is performed for the case. Results are compared favorably with experimental data from Idris et al. (2014). The geometry is planned to be optimized by using the adjoint method in the full paper.
Design improvement of a compressor bearing using an elastohydrodynamic lubrication model Duyar, Mustafa; Dursunkaya, Zafer (2002-07-16) Efficiency and reliability of reciprocating hermetic compressors are of increasing interest, due to stricter energy consumption regulations and customer demands. Optimization of bearing design is particularly important, since one of the main contributors to power loss materializes at the compressor bearings. After prolonged operation, there could be scoring, sometimes scuffing or seizure at the piston pin bearing, which results in a decrease in the efficiency and reliability of the compressor. In this study...
Design Improvement Based on Wear of a Compressor Bearing Using an Elastohydrodynamic Lubrication Mode Duyar, Mustafa; Dursunkaya, Zafer (null; 2006-07-17) Efficiency and reliability of reciprocating hermetic compressors are of increasing interest, due to stricter energy consumption regulations and customer demands. Optimization of bearing design is particularly important, since one of the main contributors to power loss materializes at the compressor bearings. After prolonged operation, there could be scoring, sometimes scuffing or seizure at the piston pin bearing, which results in a decrease in the efficiency and reliability of the compressor. In this study...
Design optimization of a mixed-flow compressor impeller for a small turbojet engine Cevik, Mert; Uzol, Oğuz (2011-01-01) Purpose - This paper aims to present the results of a design optimization study for the impeller of a small mixed-flow compressor. The objective of the optimization is to obtain an impeller geometry that could minimize a cost function based on the specific thrust and the thrust specific fuel consumption of a small turbojet engine.

Citation Formats

B. Kısakürek, “Design elements and performance of a rotary dryer working under diffusion range of drying.,” Middle East Technical University, 1968.