A technique of combination of precise distance measurement made by two inwar wires two modej no.6 Geodimeters one tellurometer mra no.101 at M.E.T.U surving lab.temprature cabin and etalloning base line.

1972
Özen, Ali
Show full item record
151
views
0
downloads
https://hdl.handle.net/11511/3852
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

A novel neutral point potential stabilization technique using the information of output current polarities and voltage vector
Yamanaka, K; Hava, Ahmet Masum; Kirino, H; Tanaka, Y; Koga, N; Kume, T (Institute of Electrical and Electronics Engineers (IEEE), 2002-11-01)
This paper proposes a new neutral point potential control technique for the neutral-point-clamped three-level inverter. Utilizing the phase current polarity information, this technique distributes the redundant voltage vectors in a manner to obtain stable neutral point voltage under all operating conditions including the zero-power-factor condition. Detailed analysis and computer simulations show the superiority of the proposed method. The feasibility of the proposed method has been proven via laboratory ex...
A Landslide Monitoring Methodology Applied to a Seismically Active Region by Using Optical Fiber Systems
Arslan Kelam, Arzu; Akgün, Haluk (null; 2019-09-25)
A practical hole testing technique using a meter display eddy current instrument
Doyum, Ahmet Bülent; Ertekin, S (1998-02-01)
A practical technique for the detection of cracks emanating from holes was investigated for non-ferrous materials using the eddy current method. This technique is suggested when more appropriate test equipment is not available. An unshielded absolute pencil probe and a meter display instrument were utilized in the study. It was determined that holes with a minimum diameter of 6.5 mm can be tested efficiently for the detection of cracks at least 0.15 mm deep. For the equipment used, the hole depth that can b...
A Novel Bridgeless Power Factor Correction with Interleaved Boost Stages in Continuous Current Mode
Li, Qingnan; Andersen, Michael A. E.; Thomsen, Ole C. (2011-09-10)
The operation and trade-off of Bridgeless Power Factor Correction (BPFC) circuit with interleaved Boost stages are investigated. By using interleaved BPFC, an overall reduction of the size of EMI filter can be achieved without increasing the switching frequency of the converter. And higher efficiency can be expected in interleaved BPFC through the universal line input comparing with traditional BPFC. Furthermore, an optimization procedure is implemented to improve system power density. Analysis and simulati...
A Novel Multilevel Converter Used For Three Phase STATCOM under Unbalanced Load
Balikci, A.; AKPINAR, ERCAN (2011-09-10)
In this paper, multi-level cascaded Static Synchronous Compensator (STATCOM) is proposed using a novel converter having reduced number of switches. STATCOM is analyzed by using DSP and Matlab, interactively. The level shifted carrier based SPWM method, instantaneous single phase active (P) and reactive (Q) power algorithms are applied to control this converters. The performance of STATCOM is investigated for unbalanced reactive load conditions. The simulation results of Matlab alone and Matlab interactively...
Citation Formats
A. Özen, “A technique of combination of precise distance measurement made by two inwar wires two modej no.6 Geodimeters one tellurometer mra no.101 at M.E.T.U surving lab.temprature cabin and etalloning base line.,” Middle East Technical University, 1972.
METU IIS - Integrated Information Service open@metu.edu.tr