A new method for solution of axi-symmetric sandwich shells under axi-symmetric loading.

1973
Kalgay, Mehmet Fuat
Show full item record
60
views
0
downloads
https://hdl.handle.net/11511/3910
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

A new finite element method for eletromagnetic boundary value problems in combined interior and exterior regions.
Kuzuoğlu, Mustafa; Hızal, Altunkan; Department of Electrical and Electronics Engineering (1986)
A new method for automated estimation of joint roughness coefficient for 2D surface profiles using power spectral density
Unlusoy, Deniz; Süzen, Mehmet Lütfi (Elsevier BV, 2020-01-01)
In this study, a new method for the objective and accurate estimation of the joint roughness coefficient (JRC) of surface profiles, which are extracted from terrestrial laser scanner point clouds, is proposed. The requirements of objectivity, accuracy, reliability, and suitability for automatic analysis have been the basic criteria in assessing the performance of the procedure for JRC estimation. The procedure to estimate the JRC value of a sample profile is based on a similarity measure, between the third-...
A new method for design parameter optimization of products or processes with an ordinal categorical response
Erdoğan, Pınar; Köksal, Gülser; Dolgun, Leman Esra; Department of Industrial Engineering (2022-8)
It is an important design problem to obtain the best parameter values that are insensitive to the variability of input, process or environmental factors of a product or process. Therefore, many industrial organizations use robust parameter design (RPD). While there are many methods in the literature for design parameter optimization with continuous quality characteristics, fewer studies are found for ordered categorical quality characteristics. This study proposes a new method for finding robust levels of d...
A new formulation for the analysis of bonded elastic layers
Pınarbaşı, Seval; Akyüz, Uğurhan; Department of Civil Engineering (2007)
Elastic layers bonded to reinforcing sheets are widely used in many engineering applications, e.g., as elastic foundations to machinery, as seismic isolators to structures, etc. Because of its practical importance, the behavior of bonded elastic layers under some basic deformation modes (e.g., compression, bending and shear modes) has attracted the attention of many researchers. However, the analytical works available in literature involve, with the object of obtaining design formulas, many simplifying assu...
A new boundary element formulation for wave load analysis
Yalcin, O. Fatih; Mengi, Yalcin (Springer Science and Business Media LLC, 2013-10-01)
A new boundary element (BEM) formulation is proposed for wave load analysis of submerged or floating bodies. The presented formulation, through establishing an impedance relation, permits the evaluation of the hydrodynamic coefficients (added mass and damping coefficients) and the coefficients of wave exciting forces systematically in terms of system matrices of BEM without solving any special problem, such as, unit velocity or unit excitation problem. It also eliminates the need for scattering analysis in ...
Citation Formats
M. F. Kalgay, “A new method for solution of axi-symmetric sandwich shells under axi-symmetric loading.,” Middle East Technical University, 1973.
METU IIS - Integrated Information Service open@metu.edu.tr