TRANSMISSION ELECTRON-MICROSCOPY IMAGE-ANALYSIS OF COMPOSITE PRECIPITATES IN AL-LI-ZR ALLOYS

Date

1995-08-15

Author

Aydınol, Mehmet Kadri

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

40
views

0
downloads

Subject Keywords

General Materials Science

URI

https://hdl.handle.net/11511/39552

Journal

JOURNAL OF MATERIALS SCIENCE LETTERS

DOI

https://doi.org/10.1007/bf00423387

Collections

Department of Metallurgical and Materials Engineering, Article

Suggestions

OpenMETU
Core

Resonance-Based Temperature Sensors using a Wafer Level Vacuum Packaged SOI MEMS Process Aydın, Gülşah Demirhan; Akın, Tayfun (VBRI Press AB, 2020-01-01) This paper reports the development of resonance-based temperature sensors using a wafer level vacuum packaged SOI MEMS process which is normally used to implement various MEMS sensors, including MEMS gyroscopes and accelerometers. Implementing MEMS temperature sensors in such a MEMS process together with sensitive MEMS sensors allows obtaining temperature data, which is very useful for the compensation of a number of parameters of these MEMS sensors for obtaining improved performance from these sensors. Fou...
Liquid Crystal-Templated Synthesis of Mesoporous Membranes with Predetermined Pore Alignment Karausta, Asli; Büküşoğlu, Emre (American Chemical Society (ACS), 2018-10-03) We demonstrate that polymeric films templated from liquid crystals (LCs) provide basic design principles for the synthesis of mesoporous films with predetermined pore alignment. Specifically, we used LC mixtures of reactive [4-(3-acryloyoxypropyloxy) benzoic acid 2-methyl-1,4-phenylene ester (RM257)] and nonreactive [4-cyano-4'-pentylbiphenyl (5CB)] mesogens confined in film geometries. The LC alignment was maintained by functionalization of the surfaces contacting the films during polymerization. Through p...
Investigation of as-quenched and tempered commercial steels by Magnetic Barkhausen Noise method Gür, Cemil Hakan; Çam, İbrahim (Inderscience Publishers, 2006-01-01) This study aims to characterise as-quenched and tempered steels by the Magnetic Barkhausen Noise method, and to contribute to optimisation of heat treatment processes. Identical austenitisation and quenching procedures were applied to SAE 1040 and SAE 4140 specimens to eliminate the effect of grain size. Samples were tempered at 200°C and 600°C for 2 hours. Microstructures were characterised by metallographic examinations and hardness measurements. Amplitude, position and frequency spectrum of signals were ...
Ambient synthesis of nanomaterials by in situ heterogeneous metal/ligand reactions Chang, Boyce S.; Thomas, Brijith; Chen, Jiahao; Tevis, Ian D.; Karanja, Paul; Çınar, Simge; Venkatesh, Amrit; Rossini, Aaron J.; Thuo, Martin M. (Royal Society of Chemistry (RSC), 2019-08-07) Coordination polymers are ideal synthons in creating high aspect ratio nanostructures, however, conventional synthetic methods are often restricted to batch-wise and costly processes. Herein, we demonstrate a non-traditional, frugal approach to synthesize 1D coordination polymers by in situ etching of zerovalent metal particle precursors. This procedure is denoted as the heterogeneous metal/ligand reaction and was demonstrated on Group 13 metals as a proof of concept. Simple carboxylic acids supply the etch...
Metallurgical influence on quench distortion of SAE 52100 long cylinders Maradit, B.P.; Şimşir, C.; Lübben, T.; Gür, Cemil Hakan (Informa UK Limited, 2011-06-01) Quenching of steel components results in complex and hard-to-predict dimensional and shape changes (distortion). Even the components manufactured from different parts of the same semifinished product may show significantly different distortion behaviours during quenching. The reason is thought to be non-uniform distribution of distortion potential carriers in the final component (i.e. alloying elements, segregations, residual stresses and phases) which are accumulated throughout the whole manufacturing chai...

Citation Formats

M. K. Aydınol, “TRANSMISSION ELECTRON-MICROSCOPY IMAGE-ANALYSIS OF COMPOSITE PRECIPITATES IN AL-LI-ZR ALLOYS,” JOURNAL OF MATERIALS SCIENCE LETTERS, pp. 1147–1149, 1995, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/39552.