Process design for low temperature drying and carbonisation of Seyitömer lignite for the production of lump size smokeless fuel.

1977
Ali, Ahmet Ersan
Show full item record
108
views
0
downloads
https://hdl.handle.net/11511/4115
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Process Development for the Fabrication of a Three Axes Capacitive MEMS Accelerometer
Aydemir, Akin; Akın, Tayfun (2015-09-09)
This paper presents a new approach for the fabrication of a three-axis capacitive MEMS accelerometer that is capable of differentially sensing the acceleration in all three orthogonal axes. For the first time in literature, differential sensing for the out of plane direction is achieved by defining a movable sensing electrode on the structural layer of the SOI wafer that is sandwiched between two stationary electrodes defined on the glass substrate and the handle layer of the SOI wafer enabling the differen...
Process development for continuous photofermentative hydrogen production
Boran, Efe; Eroğlu, İnci; Özgür, Ebru; Department of Chemical Engineering (2011)
By the integration of dark and photo fermentative hydrogen production processes, higher yields of hydrogen can be obtained from biomass. In the first step, biomass is utilized for hydrogen production by dark fermentation and in the second step, the effluent of dark fermentation is further utilized for hydrogen production by photofermentation using photosynthetic purple non-sulfur bacteria. The purpose of this study was to develop a solar pilot scale tubular photobioreactor (PBR) for continuous photo ferment...
Process synthesis studies in batch distillation column design and operation
Alkaya, Dilek; Gürkan, Türker; Özgen, Canan; Department of Chemical Engineering (1997)
Process efficiency characterization of plastic medium tricking filters
Üçüncü, Ayşen; Uluğ, S. Erol; Department of Environmental Engineering (1989)
Process characterization of composite structures manufactured using resin impregnation techniques
Miskbay, Adem Onur; Parnas, Kemal Levend; Department of Mechanical Engineering (2009)
The aim of this study is to investigate and compare the properties of two layer carbon epoxy composite plates manufactured using various resin impregnation techniques; Resin Transfer Molding (RTM), Light RTM (LRTM), Vacuum Assisted RTM (VARTM) and Vacuum Packaging (VP). Throughout the study a different packaging method was developed and named Modified Vacuum Packaging (BP). The mechanical properties of composite plates manufactured are examined by tensile tests, compressive tests, in-plane shear tests and t...
Citation Formats
A. E. Ali, “Process design for low temperature drying and carbonisation of Seyitömer lignite for the production of lump size smokeless fuel.,” Middle East Technical University, 1977.
METU IIS - Integrated Information Service open@metu.edu.tr