Formation of styrene-acrylonitrile copolymer-mortar composite and its properties.

1978
Tuğlu, Pamir
Show full item record
115
views
0
downloads
https://hdl.handle.net/11511/4136
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Formation of Patterned Indentations for Additive Manufacturing Applications
Yaman, Ulaş; Dölen, Melik (null; 2017-09-02)
—This paper proposes a novel approach to generate patterned indentations for different additive manufacturing methodologies. Surface textures have many practices in different fields and require special manufacturing considerations. Beside conventional manufacturing processes, additive processes have also been utilized in the last decade to obtain textured surfaces. The current design and fabrication pipeline of additive manufacturing operations have many disadvantages in terms of surface patterns. For insta...
Formation and Characterization of Sub-Micron Inert Particle Embedded Nickel Composite Coatings
Yılmaz Tüzün, Özgül; Karakaya, İshak (2017-06-01)
Composite coatings have a wide range of application areas requiring improved mechanical and tribological properties. Due to its enhanced properties, Ni-Al2O3 electro-co-deposition rather than pure Ni electrodeposition was investigated. A typical sulfamate bath was used to evaluate the effects of current density on hardness and the amount of deposited Al2O3. It was found that increase in current density increases the hardness and deposited wt.% Al2O3 particles within the parameter ranges covered in this stud...
Formation and characterization of infrared absorbing copper oxide surfaces
Arslan, Burcu; Erdogan, Metehan; Karakaya, İshak (2017-04-30)
Copper oxide formation has been investigated to combine the advantages of producing different size and shapes of coatings that possess good light absorbing properties. An aqueous blackening solution was investigated and optimum composition was found as 2.5 M NaOH and 0.225 M NaClO to form velvet copper oxide films. A two-step oxidation mechanism was proposed for the blackening process by carefully examining the experimental results. Formation of Cu2O was observed until the entire copper surface was covered ...
Preparation of cross-linked tyrosinase aggregates
Aytar, Burcu Selin; Bakir, Ufuk (Elsevier BV, 2008-02-01)
Tyrosinase from mushroom was immobilized as a cross-linked enzyme aggregate (CLEA) via precipitation with ammonium sulfate and cross-linking with glutaraldehyde. The effects of precipitation and cross-linking on CLEA activity were investigated and the immobilized tyrosinase was characterized. Sixty percent ammonium sulfate saturation and 2% glutaraldehyde were used; a 3-h cross-linking reaction at room temperature, at pH 7.0 was performed; particle sizes of the aggregates were reduced; consequently, 100% ac...
Preparation and characterization of butadiene-styrene and ethylene oxide-styrene block copolymers.
Orhan, Erdal H; Baysal, Bahattin; Department of Chemistry (1975)
Citation Formats
P. Tuğlu, “Formation of styrene-acrylonitrile copolymer-mortar composite and its properties.,” Middle East Technical University, 1978.
METU IIS - Integrated Information Service open@metu.edu.tr