Analysis of circular and polygonal planar rods an elastic foundation.

Date

1974

Author

Özdüzen, Hasan Avni

Metadata

Show full item record

Item Usage Stats

38
views

0
downloads

URI

https://hdl.handle.net/11511/4334

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Analysis of frictional contacts with heat generation considering temperature dependent properties BALCI, MEHMET NURULLAH; YILDIRIM, BORA; Dağ, Serkan (2015-10-01) The problem of thermoelastic contact for the homogenous isotropic half-plane with a sliding rigid flat punch problem is investigated. As the rigid flat punch is assumed to slide over the surface of the material, heat is generated due to the friction between the punch and a surface. This heat causes the change of material thermoelastic properties and this change is taken into account in this work by using temperature dependent material properties. In order to obtain the steady state solution, frictional heat...
Analysis of laterally loaded doubly connected rectangular plates by means of finite differences. Özbilen, Pertev Erinc; Department of Civil Engineering (1972)
Analysis of laminar natural convective heat transfer in a triangular enclosure Al-Shariah, Adnan M; Ecevit, Ahmet; Department of Physics (1990)
Analysis of circular waveguides coupled by axially uniform slots Öztürk, Mensur; Çağlayan, Fatih; Department of Electrical and Electronics Engineering (2006) The characteristics of slotted circular waveguides with different dimensions, including cutoff frequencies of TE and TM modes, impedance and modal field distributions will be analyzed using the generalized spectral domain approach. The Method of Moment will be applied, basis functions that include the edge conditions will be used and a computer program will be developed. Obtained results will be presented for different number, depth and thickness of coupling slots, and compared with available data to demons...
Analysis of spherical-rectangular printed antennas and antenna arrays using cavity model Demir, Oğuz; Dural Ünver, Mevlüde Gülbin; Department of Electrical and Electronics Engineering (2017) Printed antennas are commonly used since these antennas are preferred in many applications due to their advantageous properties. In order to employ these antennas in such applications, a thorough investigation and analysis are generally required. Although this can be implemented with fully numerical methods for the sake of high accuracy, the complex calculations required in the process lead to heavy computational load, hence generally demands high quality simulation software. In this thesis, the spherical-r...

Citation Formats

H. A. Özdüzen, “Analysis of circular and polygonal planar rods an elastic foundation.,” Middle East Technical University, 1974.