Comparison between different methods of joint construction in concrete roads and some propositions for Turkey.

1963
Uluçaylı, Mehmet
Show full item record
138
views
0
downloads
https://hdl.handle.net/11511/4577
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Comparison of hydraulic transportation with other kinds of transportation systems used in mortaş bauxite mine.
Bilir, Ömer Gündüz; Department of Mining Engineering (1969)
Comparison of the Combustion Characteristics of Three Different Fossil Fuels from Turkey
Hiçyılmaz, C; Altun, Naci Emre (2003-06-01)
In this study, thermal features and reaction kinetics of the raw Çorum-Alpagut Lignite, Zoııguldak-Üzülmez Bituminous Coal and Şırnak-Avgamasya Asphaltite were investigated through a qualitative and quantitative comparison via Thermogravimetric Analysis (TG/DTG) and an Arrhenius Type Kinetic Model, in order to determine the liability to ignite and effectiveness of the combustion of the concerned fuels as well as the critical points during their reaction periods. At the end of experiments, Alpagut Lignite, Ü...
Comparison of different methods on the enrichment of Konya Inlice epithermal gold ores
Döğme, Ayşe Nur (2020-01-01)
In this study, firstly, enrichment experiments were carried out on the epithermal gold ore belonging to the Konya-Inlice region containing 2.38 ppm Au-containing oxide type ore and 1.39 ppm Au-containing sulfur ore with using Falcon device as a gravity enrichment method. In these group experiments, the effects of parameters such as centrifugal force, bowl type effect, and a solid ration of feeding were investigated. As the second enrichment method, the conventional flotation technique was applied. In these ...
Comparison of the Performance of Different Active Suspension Architectures Equipped with Linear Electric Motors
Bayar, Kerem; Büyüker, Banu Çiçek (2022-01-01)
Despite the ever-increasing studies on active suspensions, most of which illustrate significant improvements over the conventional suspension systems, there have been only a few recent real-life applications in modern production vehicles. The drawbacks of high cost, added weight, added power requirement, and difficulty of maintenance which require specialized tools and technicians, have constrained these applications to the luxury vehicles. This work focuses on comparing the performance of three different a...
Comparison between performances of Monte Carlo method and method of lines solution of.discrete ordinates method
Demirkaya, G; Arinc, F; Selçuk, Nevin; Ayranci, I (2005-06-01)
Monte Carlo method was used to predict the incident radiative heat fluxes on the freeboard walls of the METU 0.3 MWt atmospheric bubbling fluidized bed combustor based on the data reported previously. The freeboard was treated as a rectangular enclosure with gray interior walls and gray, absorbing, emitting and isotropically scattering medium. A Monte Carlo solver was developed and the performance of the solver was assessed by comparing its predictions with those of method of lines solution of discrete ordi...
Citation Formats
M. Uluçaylı, “Comparison between different methods of joint construction in concrete roads and some propositions for Turkey.,” Middle East Technical University, 1963.
METU IIS - Integrated Information Service open@metu.edu.tr