A Study on the treatment of phenolic industrial wastewaters by physico-chemical biological methods

Download
002918.pdf
1988
Işıkman, Ömer
Show full item record
59
views
0
downloads
https://hdl.handle.net/11511/4607
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

A study on the effects of catalysts on pyrolysis and combustion characteristics of Turkish lignite in oxy-fuel conditions
ABBASI-ATIBEH, Ehsan; Yozgatlıgil, Ahmet (Elsevier BV, 2014-01-01)
The catalytic pyrolysis and combustion characteristics of low calorific value Turkish lignite in various ambient conditions were explored and the evolution of gases during pyrolysis tests was examined using a Thermogravimetric Analyzer coupled with a Fourier Transform Infrared spectrometer (TGA-FTIR). Potassium carbonate (K2CO3), calcium hydroxide (Ca(OH)(2)) and iron (III) oxide (Fe2O3) were employed as precursors of the catalysts and compared to the Raw-form (no catalyst added) to investigate the effects ...
A study on the effects of different gums on dielectric properties and quality of breads baked in infrared-microwave combination oven
Keskin, Semin Ozge; Şümnü, Servet Gülüm; Şahin, Serpil (Springer Science and Business Media LLC, 2007-01-01)
In this study, the effects of different gums on dielectric properties of doughs and breads baked in infrared-microwave combination oven were investigated. In addition, the quality parameters of breads formulated with different gums baked in infrared-microwave combination oven were determined. The gums used were xanthan, guar, xanthan-guar blend and kappa-carrageenan. The gums were added to the formulation at 0.5% concentration. The dielectric properties and quality parameters of breads baked in infrared-mic...
A Study on Magnetic Properties of Ni50FexAl50-x Alloys
Duman, Nagehan; Mekhrabov, Amdulla; Akdeniz, Mahmut Vedat (2009-07-27)
A Study on the utilization of waste cement - bonded wood particle board as a raw material and a secondary fuel in cement manufacturing
Yılmaz, Mustafa; Tokyay, Mustafa; Öztürk, Abdullah; Department of Cement Engineering (2012)
A considerable amount of waste is obtained as a result of edge-cutting operations during cement-bonded wood particle board (CBWPB) manufacturing. This waste material which basically contains wood chips and hydrated cement has to be disposed of and does not have any economical value. However, it can be burned in cement rotary kilns and may result in energy savings to a certain extent due to the presence of wood particles as a secondary fuel and since the hydrated cement may be decomposed and then reform clin...
A Study on matched-piece lapping process for production of precision machine elements
Vayghannezhad, Salar; Dölen, Melik; Department of Mechanical Engineering (2014)
The process of lapping has been long regarded as an art. Since the quality of lapping differs from one operator to another, significantly and the results are often time inconsistent. The material removal rate, surface finish and geometry all depends on proper control of lapping parameters (e.g. lapping speed, lapping pressure, lapping material and size and type, workpiece material and hardness, etc.). Furthermore, to attain the desired outcomes, it is imperative to select proper values for lapping process c...
Citation Formats
Ö. Işıkman, “A Study on the treatment of phenolic industrial wastewaters by physico-chemical biological methods,” Middle East Technical University, 1988.
METU IIS - Integrated Information Service open@metu.edu.tr