Effects of blast furnace slag and flyash on stabilization of base materials meeting the requirements of Turkish highway specifications.

1966
Elverici, Umran
Show full item record
47
views
0
downloads
https://hdl.handle.net/11511/4756
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Effects of Antivortex Structures Installed on Trapezoidal Labyrinth Side Weirs on Discharge Capacity and Scouring
EMİROĞLU, MUHAMMET EMİN; Göğüş, Mustafa; Tunc, Mustafa; Islamoglu, Kadir (2017-06-01)
Greater or more constant discharge can be achieved at lower upstream water depths over the weir crest by increasing the effective lengths of labyrinth side weirs. Labyrinth weirs have unevenly shaped crests, resulting in greater crest lengths at the weir opening. Labyrinth side weirs have significant advantages over conventional weirs. For example, the discharge capacities of labyrinth side weirs are 1.5-4.5 times that of conventional side weirs. In this study, the effects of using an antivortex structure i...
Effects of thermomechanical treatment and aging on bulk formability of 7475 aluminum plate.
Naqvi, Syed Anis Asghar; Department of Metallurgical Engineering (1982)
Effects of CO₂ saturation on the recovery of the heavy oil using steam injection EOR technique
Farid, Guluzade; Sınayuç, Çağlar; Department of Petroleum and Natural Gas Engineering (2014)
Enhanced Oil Recovery processes include all methods that use external sources of energy and/or materials to recover oil that cannot be produced economically by conventional means. EOR processes can be classified as: thermal methods (in-situ combustion, cyclic steam injection, steam flooding), chemical methods (alkaline, polymer, foam, or surfactant/polymer injection), and miscible methods (CO2, nitrogen, hydrocarbon, or flue gas injection). Steam flooding involves continuous injection of steam to displace o...
Effects of collars on scour reduction at bridge abutments
Doğan, Abdullah Ercüment; Göğüş, Mustafa; Department of Civil Engineering (2008)
Bridge failures are generally resulted from scour of the bed material around bridge piers and abutments during severe floods. In this study, scour phenomenon around bridge abutments and collars, located at abutments as scour countermeasures, were experimentally studied. The experimental study was carried out under clear-water scour conditions with uniform non-cohesive sediment (having a grain size diameter of d50=0.90 mm). The experimental flume is a rectangular channel of 30 m long and 1.5 m wide filled wi...
Effects Of Openings On Collapse Risk Of Infiled Rc Buildings
Akansel, Vesile Hatun; Yakut, Ahmet; Gülkan, Hakkı Polat (2017-11-11)
Infill wall arrangements affect the failure mechanism and create localised damages. Such effects include increased axial forces on columns due to overturning, concentrated shear forces at the ends of beams and columns, and localised deformations in columns surrounded by discontinuous infills. In this study, we concerned the effects of openings, such as doors and windows in the infill walled reinforced concrete buildings on the failure mechanisms and collapse risk. Analytical models assembled in which the in...
Citation Formats
U. Elverici, “Effects of blast furnace slag and flyash on stabilization of base materials meeting the requirements of Turkish highway specifications.,” Middle East Technical University, 1966.
METU IIS - Integrated Information Service open@metu.edu.tr