Slip energy recovery by using converters, for speed control of wound rotor induction motor.

Date

1971

Author

Balban, Muzeffer

Metadata

Show full item record

Item Usage Stats

126
views

0
downloads

URI

https://hdl.handle.net/11511/4818

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Slip-flow heat transfer in microtubes with axial conduction and viscous dissipation - An extended Graetz problem Cetin, Barbaros; Güvenç Yazıcıoğlu, Almıla; KAKAÇ, SADIK (Elsevier BV, 2009-09-01) This study is an extension of the Graetz problem to include the rarefaction effect, viscous dissipation term and axial conduction with constant-wall-heat-flux thermal boundary condition. The energy equation is solved analytically by using general eigenfunction expansion. The temperature distribution and the local Nusselt number are determined in terms of confluent hypergeometric functions. The effects of the rarefaction, axial conduction and viscous dissipation on the local Nusselt number are discussed in t...
Wear behavior of H10A AISI/SAE steel nitrided by various methods Yurtışık, Koray; Sarıoğlu, Filiz; Ankara, Alpay; Department of Metallurgical and Materials Engineering (2002) Wear performance of salt-bath, vacuum, ion nitrided and duplex treated (nitrided and ceramic coated by physical vapor deposition technique) steel dies (H10A AISI/SAE) were studied. The dies were used for forging of steel pastes (52100 AISI/SAE) at 1050°C under 700 MPa for 0.3 - 0.4 seconds during production of bearing rings. The nitrided and un-nitrided dies were investigated via optical and scanning electron microscopy, x-ray diffraction and micro-hardness determination procedures. The service lives of die...
Wear performance of squeeze cast A356/SiC particulate reinforced composites Tarkan, Burak; Sarıoğlu, Filiz; Department of Metallurgical and Materials Engineering (1998)
Fatigue performance of PVA fibre reinforced cementitious composite overlays Aleessa Alam, Burhan; Yaman, İsmail Özgür (2019-07-31) Pavement maintenance and rehabilitation is as much important as the construction work itself. In this scope, applying the correct and efficient repair method is highly critical for economic and technical reasons. Depending on the damage level, many alternative repair methods exist. Using an overlay is one common method, where a new layer can be directly applied over or replace the top part of an existing pavement. This overlay can be made from asphalt or concrete as well. With the advances in the concrete t...
Creep deformation in reinforced concrete beams. Atımtay, Ergin; Department of Civil Engineering (1967)

Citation Formats

M. Balban, “Slip energy recovery by using converters, for speed control of wound rotor induction motor.,” Middle East Technical University, 1971.