Transmission line coupler for power line communicaiton systems.

Baştürk, Tuncay


Arc gap proetction of high voltage distribution plant.
Tepetaş, Osman; Department of Electrical Engineering (1971)
Cable axial load measurement device and buckling sensor development
Usalan, Emine Ceren; Türer, Ahmet; Department of Civil Engineering (2015)
Axial compression or tension carrying members may need to be monitored for their structural behaviors and/or damage detection. In this thesis, two different types of practical and cost efficient monitoring devices are proposed: The column buckling sensor and the cable tension measuring device. The columns of steel structures are prone to buckling due to their slender nature. The buckling sensor is developed by using strain gauges installed in half Wheatstone bridge and measures the strain level of the most ...
Distribution substation control and monitoring based on an industrial MS-DOS computer
Batur, İzzet; Güven, Nezih; Department of Electrical and Electronics Engineering (1991)
Power transmission system expansion planning.
Aras, Ersin; Department of Electrical Engineering (1979)
Power Delay Product Optimized Hybrid Full Adder Circuits
Rashid, M.; Muhtaroglu, A. (2017-09-17)
Data processing performed by adder circuits need to achieve low delay and low power at the same time while maintaining low cost, due to the steep growth in mobile computation devices. Recently proposed 1-bit full adder design that hybridizes transmission gates (TG) and standard CMOS offers significant PDP improvement. Two full adder implementations are presented in this paper which further optimizes the previously presented circuits: First (CKT1) deploys GDI-cell based XNOR module to decrease PDP, while the...
Citation Formats
T. Baştürk, “Transmission line coupler for power line communicaiton systems.,” Middle East Technical University, 1971.