EFFECT OF MELT SUPERHEAT ON THE GEOMETRY OF MELT-SPUN PURE ZINC RIBBON

1995-05-01
Akdeniz, Mahmut Vedat
Show full item record
Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
62
views
0
downloads
https://hdl.handle.net/11511/48344
SCRIPTA METALLURGICA ET MATERIALIA
Department of Metallurgical and Materials Engineering, Article

Suggestions

Effect of fiber type and concrete strength on the energy absorption capacity of fiber reinforced concrete plates under quasi-static bending
Mercan, Ali Macit; Yaman, İsmail Özgür; Department of Civil Engineering (2019)
With all the known solid advantages of concrete, it has also limitations in its mechanical properties, such as low ductility, tensile strength and energy absorption capacity/toughness. In order to eliminate or minimize these limitations, some developments have been worked up by introducing natural or artificial fibers into the concrete mixture. The main scope of this thesis is to observe the effect of different fiber types and dosages on the performance of two different concrete grades. Two steel fibers wit...
Effect of Curing Time on Elastic Material Properties of Thin Spray on Liners
Güner, Doğukan; Öztürk, Hasan (null; 2015-09-14)
Effect of Flow Rate Controllers and their Opening Levels on Liquid Steel Flow in Continuous Casting Mold
Gursoy, Kadir Ali; Yavuz, Mehmet Metin (2016-01-01)
The present study investigates the mold flow structure at constant throughput condition for different slide-gate and stopper rod openings by utilizing computational fluid dynamic (CFD) modeling. Detailed validation of the CFD models are conducted using available experimental data and the performances of three different turbulence models, standard k-epsilon, realizable k-epsilon and k-omega SST are compared. The constant throughput casting operations for different slide-gate and stopper rod controller openin...
Effect of alkali-silica reaction expansion on mechanical properties of concrete
Hafçı, Alkan; Turanlı, Lütfullah; Department of Civil Engineering (2013)
Alkali-silica reaction (ASR) is a chemical deterioration process which arises in concrete due to reactive aggregate from its constituent, sufficient alkalis from cement or external resources and humidity about 85%. ASR gel, formed by the reaction, absorbs water and expands so that it causes expansion and cracking in concrete. ASR has detrimental effects on mechanical properties of concrete. Therefore, ASR which is a long and a constantly progressive reaction may become a threat to the safety of concrete str...
Effect of fiber and resin type on the axial and circumferencial tensile strength of fiber reinforced polyester pipe
Gökçe, Neslihan; Yılmazer, Ülkü; Department of Polymer Science and Technology (2008)
In this study, the aim is to investigate the stiffness, longitudinal tensile strength and circumferential tensile strength of short fiber reinforced polyester composite pipes produced by centrifugal casting production method. To achieve this aim, theoretical calculation of modulus of elasticity of pipes was done and then test program was carried out on pipe samples produced with three different resin types which were orthophthalic, isophthalic and vinyl ester resin and three different fiber types which were...
Citation Formats
M. V. Akdeniz, “EFFECT OF MELT SUPERHEAT ON THE GEOMETRY OF MELT-SPUN PURE ZINC RIBBON,” SCRIPTA METALLURGICA ET MATERIALIA, pp. 1471–1475, 1995, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/48344.
METU IIS - Integrated Information Service open@metu.edu.tr