Design of an operational amplifier to be used in active filter realizaiton.

1971
Oğuz, Gülşen
Show full item record
59
views
0
downloads
https://hdl.handle.net/11511/4999
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Design of a Software for the Construction of Heat Distribution Networks with Concentrated Solar Thermal Integration Based on Pinch and Exergy Analyses
İnce, Murat Ekin; Okutucu Özyurt, Hanife Tuba; Department of Mechanical Engineering (2019)
Searching for a sustainable solution for industry, one of the common strategies is using a Heat Distribution Network (HDN). Pinch Analysis is a common methodology to calculate the pinch point and minimum hot and cold external utilities for a HDN, which then serve as inputs to Pinch Design to build a robust HDN. Pinch Analysis and Design can be supplemented with exergy analysis to identify locations in a HDN with the largest potentials to improve thermodynamic performance. Additionally, Concentrating Solar T...
Design of a Power Plant Emulator for the Dynamic Frequency Stability Studies
Duymaz, Erencan; Pourkeivannour, Siamak; Ceylan, Doğa; ŞAHİN, İLKER; Keysan, Ozan (2018-10-25)
Increasing renewable energy integration to grid requires inertial support to improve frequency stability of the power system. Inertial support of renewable energy systems requires hardware verification in order to test practical limitations and absence of dynamical grid simulators makes verification studies more challenging. In this study, a test rig which is composed of a DC motor, an AC synchronous generator and an external flywheel, is developed in order to provide a platform in which dynamic properties ...
Design of an Optimal Sliding Mode Controller for an Active Suspension Considering Non-linear Quarter Car Model
Sadeghi-Khaneghah, Farshid; Bayar, Kerem; Department of Mechanical Engineering (2020-7-26)
A non-linear quarter car model is used in this study for developing a control algorithmfor an active suspension system. The control method used, is optimal sliding modecontrol, along with feedback linearization technique for compensating the non-linearaspects of the plant. In addition to the work in recent literature that applies thesecontrol methods, estimation of the static suspension deflection, i.e., vehicle sprungmass is performed. Through simulation results, it is shown that correct information ofv...
Design of a monopulse amplitude comparison DF processor using maximum likelihood algoritm.
Arıkan, ferhat; Department of Electrical and Electronics Engineering (1992)
Design of an oscillator circuit using large signal s-parameters
Ayöz, Suat; Günalp, Nilgün; Department of Electrical and Electronics Engineering (1989)
Citation Formats
G. Oğuz, “Design of an operational amplifier to be used in active filter realizaiton.,” Middle East Technical University, 1971.
METU IIS - Integrated Information Service open@metu.edu.tr