Yüksek sıcaklık ve yapısal uygulamalar için alüminit tabanlı çok bileşenli intermetaliklerin geliştirilmesi, modellenmesi ve karakterizasyonu

Download

T0RNeE1qST0.pdf

Date

2008

Author

Akdeniz, Vedat M.
Mekhrabov, O. Amdulla

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

51
views

278
downloads

URI

https://app.trdizin.gov.tr/publication/project/detail/T0RNeE1qST0
https://hdl.handle.net/11511/50061

Collections

Department of Metallurgical and Materials Engineering, Project and Design

Suggestions

OpenMETU
Core

Power factor enhancement of thermoelectric oxide composites for high temperature applications Yurdakul, Emre Burak; Özenbaş, Ahmet Macit; Department of Metallurgical and Materials Engineering (2018) In this work, we report a simultaneous increase in Seebeck coefficient and electrical conductivity, that results in increasing power factor, of Ca3Co4O9 (C-349) ceramic by forming a composite system together with another promising oxyselenide; BiCuSeO (BCSO). Pristine C-349 and BCSO were synthesized using sol-gel and solid-state reaction methods, respectively and mixed by several ball-milling steps. We observed a remarkable increase in the power factor of, approximately 41% higher than the power factor of p...
Design and implementation of scheduling and switching architectures for high speed networks Sanlı, Mustafa; Güran, Hasan Cengiz; Schmidt, Şenan Ece; Department of Electrical and Electronics Engineering (2011) Quality of Service (QoS) schedulers are one of the most important components for the end-to-end QoS support in the Internet. The focus of this thesis is the hardware design and implementation of the QoS schedulers, that is scalable for high line speeds and large number of traffic flows. FPGA is the selected hardware platform. Previous work on the hardware design and implementation of QoS schedulers are mostly algorithm specific. In this thesis, a general architecture for the design of the class of Packet Fa...
Software implementations of QoS scheduling algorithms for high speed networks / Pehlivanlı, Aydın; Schmidt, Şenan Ece; Department of Electrical and Electronics Engineering (2015) The end to end Quality of Service (QoS) support for the dominating multimedia traffic in the contemporary computer networks is achieved by implementing schedulers in the routers and deploying traffic shapers. To this end, realistic modeling and simulation of these components is essential for network performance evaluation. The first contribution of this thesis is the design and implementation of a C++ simulator QueST (Quality of Service simulaTor) for this task. QueST is a modular cycle accurate simulator w...
Cross-linked polybenzimidazole membranes for high temperature PEM fuel cells Özdemir, Yağmur; Özkan, Necati; Devrim, Yılser; Department of Polymer Science and Technology (2018) Literature studies have shown that it is desirable to increase operation temperature of Proton Exchange Membrane Fuel Cells (PEMFCs) due to the reasons like reduced fuel impurity sensitivity, fast electrode kinetics, simple thermal and water management. However, during fuel cell operation at high temperatures, the PEM suffers from inevitable leaching out of the doped acid, which can have deteriorating effect on the membrane performance. Thus, there is always a need to minimize this problem by making ways so...
A study on tall buildings and aerodynamic modifications against wind excitation Ilgın, H. Emre; Günel, Mehmet Halis; Department of Architecture (2006) The purpose of this thesis is to create basic design guidance for tall buildings and their aerodynamic modifications as a resource for architects, engineers, developers, and students. It aims to make a contribution to and strengthen particularly the architect̕s understanding of tall building design, that requires a high level of interdisciplinary approach, by providing a broad overview of the أtall buildingؤ with its general concepts; to demonstrate the importance of human element as a critical component in...

Citation Formats

V. M. Akdeniz and O. A. Mekhrabov, “Yüksek sıcaklık ve yapısal uygulamalar için alüminit tabanlı çok bileşenli intermetaliklerin geliştirilmesi, modellenmesi ve karakterizasyonu,” 2008. Accessed: 00, 2020. [Online]. Available: https://app.trdizin.gov.tr/publication/project/detail/T0RNeE1qST0.