Analysis of plane and space trusses with optimization and graphic techniques

Download
1988
Kırgız, Gökalp Sami

Suggestions

Analysis of Reinforced Soil Slopes with Limit Equilibrium and Finite Element Methods
Özçelik, Gökçe; Paşaoğlu, Özgür; Huvaj Sarıhan, Nejan (null; 2014-09-21)
Reinforcing elements such as geotextiles or geogrids are widely used in retaining walls, slopes and embankments since they provide an economical and practical solution. A reinforced wall transitions into a slope as the slope angle with the horizontal decreases. Therefore, the design methodology transitions from lateral earth pressure theory to slope stability analyses. For slope stability problems both limit equilibrium and finite element methods are being used widely. In limit equilibrium solutions, the re...
Analysis of structural glazing systems
Vallabhan, CVG; Aşık, Mehmet Zülfü; Kandil, K (1997-10-01)
Exterior glazing has been popular in commercial buildings especially in multistory buildings; the glass panels are bonded to the exterior of the building by silicone sealants. Thus, the glazing is identified as ''structural glazing''. Of all the structural glazing systems, the four sided support system is the most critical one. As the glass panels are designed to withstand lateral wind pressures, and when the lateral deflection of the panels increases more than its thickness, the glass plates behave nonline...
Analysis of combline directional couplers
Altay, Metin; Toker, Canan; Department of Electrical and Electronics Engineering (1991)
Analysis of quantum-dot-embedded multicavity arrays for on-chip WDM applications
Erdinc, Havva; Kocaman, Serdar (2018-01-01)
Transmission and group delay characteristics of a single-quantum-dot-(QD)-embedded double-cavity array and a triple-cavity array are compared theoretically in the weak coupling regime. When the extrinsic cavity decay rate is comparably higher than the intrinsic cavity decay rate at equal coupling strengths and normalized detuning values, transmission values of both systems converge with each other but the phase delay generated at triple-cavity systems is higher than that of the single-QD-embedded double-cav...
Analysis of structural wall systems
Bahat, Hakan Bahadır; Polat, Uğur; Department of Civil Engineering (1998)
Citation Formats
G. S. Kırgız, “Analysis of plane and space trusses with optimization and graphic techniques,” Middle East Technical University, 1988.