Correlation of cement mortar strengths and concrete strengths.

1969
Ertimur, Fatih M
Show full item record
67
views
0
downloads
https://hdl.handle.net/11511/5084
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Correlation between flow characteristics and electrical reistivity of unconsolidated limestone cores.
Zaidi, S. Tanzim Mehdi; Department of Petroleum Engineering (1981)
CORRELATION OF ROCK PROPERTIES AND CUTTING RESISTANCES IN ASSESSMENT OF DIGGABILITY WITH BUCKET-WHEEL EXCAVATORS
BOLUKBASI, N; KONCAGUL, O; PASAMEHMETOGLU, AG (1991-09-01)
A study has been undertaken to establish relationships between the O&K wedge test cutting resistances, F(A), F(L) and F(LS), and the geotechnical parameters of rock materials in the context of bucket-wheel excavator operation. Prediction equations were formed to estimate the cutting resistance from the geotechnical parameters by multiple regression analysis and the cone indenter index, uniaxial compressive strength and Shore hardness parameters have been found to be the most significant predictors.
Correlation between laboratory and field vane shear strength.
Çolpan, Metin; Department of Civil Engineering (1969)
Correlation of rock properties and the cutting performance of dosco roadway cutter loader at G.L.İ. Tunçbilek lignite coal mine.
Çam, Hasan; Department of Mining Engineering (1980)
CORRELATION OF MICROSTRUCTURE AND FAILURE INITIATING SITES IN AN AISI M2 HIGH-SPEED STEEL USING VICKERS INDENTATION
Ögel, Bilgehan (1990-01-01)
In this study, the relation of crack initiation and propagation to microstructure was shown in an AISI M2 high-speed steel using Vickers hardness indentation. Observations were carried out on the cracks generated from the corners of the square pyramid indentation in both the as-quenched, the quenched and tempered specimens. It is shown that cracks are nucleated from the corners of the indentation by either cleavage of the carbide or by decohesion between the carbide and the matrix, depending on the size o...
Citation Formats
F. M. Ertimur, “Correlation of cement mortar strengths and concrete strengths.,” Middle East Technical University, 1969.
METU IIS - Integrated Information Service open@metu.edu.tr