Behavior and strength of slabs reinforced with cold-worked twisted and hot rolled deformed steel.

Date

1969

Author

İqbal, Mohammad

Metadata

Show full item record

Item Usage Stats

40
views

0
downloads

URI

https://hdl.handle.net/11511/5087

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Behavior and strength of beams reinforced with three types of steel. Karım, Rezaul; Department of Civil Engineering (1971)
Behavior of reinforced concrete deep beam with web openings strengthened with (CFRP) sheet Jasim, Waleed A.; Tahnat, Yazan B. Abu; Halahla, Abdulsamee M. (2020-08-01) Deep beams are used in various applications in reinforced concrete (R.C.) structures. There have been continuous efforts to enhance and improve the performance of these crucial elements in (R.C.) structures by using several strengthening techniques such as using the carbon fiber-reinforced polymer (CFRP). However, by exploring the literature, none of the previously conducted experimental tests have studied the propagation of cracks beneath the (CFRP) sheets. In this research, the propagation of the first di...
Behavior of brick infilled reinforced concrete frames strengthened by cfrp reinforcement: Phase I Keskin, Rıza Secer Orkun; Özcebe, Güney; Department of Civil Engineering (2002)
Strength of cement grout plugs in salt Akgün, Haluk (1991-01-01) Design of plugs for abandonment of boreholes and shafts may be governed by the bond strength between the plug and host rock. This paper presents the results of push-out tests on cement grout plugs in salt. Two expandable cement grouts have been tested. The average interface shear strengths ranged from 2 to 12 MPa. Peak shear stresses at failure, assuming an elastic stress distribution along the interface, were up to eight times higher. Standard deviation commonly reached 20%. Dissolution along the interface...
Strength of Cement Grout Plugs in Salt Akgün, Haluk (1994-01-01)

Citation Formats

M. İqbal, “Behavior and strength of slabs reinforced with cold-worked twisted and hot rolled deformed steel.,” Middle East Technical University, 1969.