Some basic considerations and a study of two tests on a new type of a specimen for punching strength of flat plates.

Date

1970

Author

Acar, Alp

Metadata

Show full item record

Item Usage Stats

31
views

0
downloads

URI

https://hdl.handle.net/11511/5100

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Some observations on the state of economics in Turkey Şenses, Fikret (2008-09-01)
SOME REMARKS ON ROTATION SEQUENCES AND ASSOCIATED ANGULAR VELOCITIES Özgören, Mustafa Kemal (1994-10-01) General m-step rotation sequences are considered in which the k th rotation (k = 1, 2, ..., m) takes place about an axis whose unit vector is specified with its components in an arbitrary reference frame. A theorem is introduced in order to limit the arbitrariness of these frames so that the overall transformation matrix between the initial and final frames is minimal, i.e. expressible as an m-factor product of only m exponential rotation matrices. Afterwards, expressions are given for the angular velocitie...
Further comments on the diffusion equations for membrane formation McHugh, A.J.; Yılmaz, Levent (1989-01-01)
Some investigations on the corrosion characteristics of high silicon iron alloys. Omurtag, Yıldırım; Department of Mechanical Engineering (1968)
Some remarks on the removal rates of H2S within the suboxic zone of the Black Sea Gokmen, S; Basturk, O (1997-06-19) This work constitutes an initial effort for studying the removal and/or oxidation rates of hydrogen sulfide at different surfaces of the suboxic zone of the Black Sea. The measurements were made by mixing waters from the suboxic zone (sigma(theta)=15.70-16.20) and from the upper layer of the anoxic zone (sigma(theta)=16.50). The half-life of H2S removal within the interior of cyclonic gyre was found to be twice that measured in the rim current region close to the Bosphorus northern exit, whereas the largest...

Citation Formats

A. Acar, “Some basic considerations and a study of two tests on a new type of a specimen for punching strength of flat plates.,” Middle East Technical University, 1970.