Fall-cone test in shear strength evaluation.

Date

1971

Author

Elverici, Ünal

Metadata

Show full item record

Item Usage Stats

44
views

0
downloads

URI

https://hdl.handle.net/11511/5163

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Drop test simulation of a munition with foams and parametric study on foam geometry and material Gerçeker, Bora; Ulaş, Abdullah; Parnas, Kemal Levend; Department of Mechanical Engineering (2012) Unintentional drop of munitions could be encountered during the storage, transportation, and loading processes. In such an impact, malfunctioning of crucial components of munitions is the worst scenario that may be encountered and level of loads should not reach to critical levels. From two possible methods, experimental one is not frequently applied owing to high cost of money and time. On the contrary, particularly in last couple of years, interest is shifted to numerical simulations such as finite elemen...
Lateral Load Testing of a two story building up to near collapse Binici, Barış; Canbay, Erdem; Yakut, Ahmet (null; 2015-11-06)
Stress comparison of flat slabs by finite element method. Guvenen, Haldun; Department of Civil Engineering (1975)
COLLAPSE FRAGILITY ANALYSIS OF REINFORCED CONCRETE TALL BUILDINGS Budak, Erhan; Çelik, Ozan Cem; Sucuoğlu, Haluk; Department of Civil Engineering (2022-9-02) Seismic performance of a 253 m tall reinforced concrete core wall building in Istanbul, designed according to performance-based seismic design principles, was assessed to determine the response parameters that control the serviceability, safety and collapse performance limit states. An ambient vibration test of the building was performed to identify its dynamic properties, including the damping properties for service loads. A three- dimensional linear elastic finite element structural model of the building ...
Deformation characteristics of simply supported R.C. beams under sustained load. Fraywat, Shurki; Department of Civil Engineering (1966)

Citation Formats

Ü. Elverici, “Fall-cone test in shear strength evaluation.,” Middle East Technical University, 1971.