On the design of recreational type small craft harbors.

1971
Öner, Orhan A
Show full item record
116
views
0
downloads
https://hdl.handle.net/11511/5200
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

On the design of staggered moving target indicator filters
ISPIR, Mehmet; Candan, Çağatay (Institution of Engineering and Technology (IET), 2016-01-01)
The problem of moving target indicator (MTI) filter design for radar systems with non-uniform (staggered) pulse repetition intervals is examined. The goal is to realise and then utilise a trade-off in the design of MTI filter between the conflicting requirements of high suppression of undesired signal (clutter echo) and minimal suppression of desired signal (target echo). To that aim, three design methodologies, namely, least squares, convex optimisation and min-max error, are studied. The numerical results...
On the Design and Implementation of Higher Order Differential Microphones
De Sena, Enzo; Hacıhabiboğlu, Hüseyin; Cvetkovic, Zoran (2012-01-01)
A novel systematic approach to the design of directivity patterns of higher order differential microphones is proposed. The directivity patterns are obtained by optimizing a cost function which is a convex combination of a front-back energy ratio and uniformity within a frontal sector of interest. Most of the standard directivity patterns-omnidirectional, cardioid, subcardioid, hypercardioid, supercardioid-are particular solutions of this optimization problem with specific values of two free parameters: the...
on the analysis and design of a new type of partially compliant mechanism
Tanık, Engin; Söylemez, Eres; Department of Mechanical Engineering (2007)
In this study analysis and design procedures of partially compliant mechanisms using two degree of freedom mechanism model are developed. The flexible segments are modeled as revolute joints with torsional springs. While one freedom is controlled by the input to the mechanism, the motion of the parts are governed both by the kinematics and the force balance. The procedure developed for the analysis of such mechanisms is shown on two different mechanisms: a five link mechanism with crank input and slider out...
On the design of a novel fully compliant spherical four-bar mechanism
Parlaktaş, Volkan; Tanık, Engin; Tanık, Çağıl Merve (SAGE Publications, 2019-9)
<jats:p> In this article, a novel fully compliant spherical four-bar mechanism is introduced and its generalized design methodology is proposed. The original fully compliant mechanism lies on a plane at the free position (undeflected position); therefore, it has the advantages of ease of manufacturing, minimized parts, and no backlash. First, the mobility conditions of the mechanism are obtained. The dimensions of the mechanism are optimally calculated for maximum output rotation, while keeping the deflecti...
On the methods for estimating the rate of littoral drift.
Aybars, Seçkin; Department of Civil Engineering (1972)
Citation Formats
O. A. Öner, “On the design of recreational type small craft harbors.,” Middle East Technical University, 1971.
METU IIS - Integrated Information Service open@metu.edu.tr