Prediction of pre-arcing time/current characterisitcs of electric fuses.

1973
Türker, Musa
Show full item record
48
views
0
downloads
https://hdl.handle.net/11511/5241
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Prediction of the cutting forces for robotic grinding processes with abrasive mounted bits
Açıkgöz, Kemal; Konukseven, Erhan İlhan; Department of Mechanical Engineering (2015)
In this study, cutting forces for robotic grinding processes with mounted bits are investigated. In the majority of the grinding literature, the grinding process is analyzed based on rigid grinding machines and larger size wheels. However, the robotic grinding systems involve small size tools. Therefore, currently there is a need to experimentally study the geometry and force relationships for mounted bits. In order to overcome some of the difficulties arising in grinding studies (e.g. need for dressing, co...
PREDICTION OF SEISMIC ENERGY DISSIPATION IN SDOF SYSTEMS
Nurtuğ, Alphan; Sucuoğlu, Haluk (1995-11-01)
A simple analytical procedure is developed for calculating the seismic energy dissipated by a linear SDOF system under an earthquake ground excitation. The ground excitation is specified by its pseudo‐velocity spectra and effective duration whereas the SDOF system is defined by its natural period of vibration and viscous damping ratio. However, the derived relationship for the energy dissipation demand under an earthquake excitation is sensitive neither to the viscous damping ratio nor the ductility ratio w...
Prediction of specific explosive consumption and number of holes for tunnel blasting by field experiments
Bilen, Emin; Bilgin, Aydın; Department of Mining Engineering (1994)
PREDICTION OF SURFACE RESIDUAL STRESSES IN BUTT-WELDED STEEL PLATES BY MAGNETIC BARKHAUSEN NOISE ANALYSIS
Gür, Cemil Hakan; Yelbay, Hasan İlker; Çam, İbrahim (2010-06-11)
Residual stresses have significant inflences on the service performance of the welded components. Various studies have been continuing to develop nondestructive methods for determination of residual stresses with portable equipment and short measurement time, as an alternative to the existing techniques such as X-ray diffraction. This study aims to investigate the applicability of Magnetic Barkhausen Noise method on predicting surface residual stresses in the welded steel plates.
Prediction of plastic instability and forming limits in sheet metal forming
Şanay, Berkay; Oral, Süha; Kaftanoğlu, Bilgin; Department of Mechanical Engineering (2010)
The Forming Limit Diagram (FLD) is a widely used concept to represent the formability of thin metallic sheets. In sheet metal forming processes, plastic instability may occur, leading to defective products. In order to manufacture defect free products, the prediction of the forming limits of sheet metals is a very important issue. FLD’s can be obtained by several experimental, empirical and theoretical methods. However, the suitability and the accuracy of these methods for a given material may vary. In this...
Citation Formats
M. Türker, “Prediction of pre-arcing time/current characterisitcs of electric fuses.,” Middle East Technical University, 1973.
METU IIS - Integrated Information Service open@metu.edu.tr