CONTRIBUTION OF PHYSICAL FORCES ON THE DESIGN OF BIOMIMETIC TISSUE SUBSTITUTES

Date

2014-01-01

Author

Ermis, Menekse
Baran, Erkan Turker
Dursun, Tugba
Antmen Altunsoy, Ezgi
Hasirci, Vasif

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

56
views

0
downloads

Subject Keywords

MESENCHYMAL STEM-CELLS, INDUCED SHEAR-STRESS, HYDROSTATIC-PRESSURE, MECHANICAL STRAIN, GENE-EXPRESSION, CULTURE-SYSTEM, BONE, DIFFERENTIATION, STIMULATION, FLOW

URI

https://hdl.handle.net/11511/52589

Journal

BIO-INSPIRED MATERIALS FOR BIOMEDICAL ENGINEERING

Collections

Department of Engineering Sciences, Article

Suggestions

OpenMETU
Core

Effect of Prescribed Boundary Conditions on the Condenser Behavior of Grooved Heat Pipes Pourabdollah Vardin, Ali; Dursunkaya, Zafer; Department of Mechanical Engineering (2022-2) Rapid enhancements in electronic microchips bring the need to design and manufacture advanced cooling devices which can operate effectively without external source. Passive heat exchangers like heat pipes can remove a remarkable amount of heat with the help of capillary action. The phase change process in heat pipes, which utilizes the latent heat energy, enables high heat transfer rate over small temperature differences. Although the physics of evaporation in grooved heat pipes is understood, and comparati...
Effect of material characteristics on the properties of blended cements containing high volumes of natural pozzolans Turanlı, Lutfullah; Uzal, B; Bektas, F (Elsevier BV, 2004-12-01) The effect of three different natural pozzolans from Turkish deposits on the properties of blended cements produced by intergrinding cement clinker with a high volume of natural pozzolan (55 wt.% of the cementitious material) was investigated. The particle size distribution of blended cements, setting time, heat of hydration, and compressive strength of blended cement mortars were determined. Experimental results showed that the hardness of the pozzolanic material strongly influenced the particle size distr...
The effect of different high pressure conditions on the quality and shelf life of cold smoked fish ERKAN ÖZDEN, Nuray; Uretener, Gonca; Alpas, Hami; Selcuk, Arif; Ozden, Ozkan; Buzrul, Sencer (2011-04-01) Cold smoked salmon were HP treated at 220, 250 and 330 MPa, at 3, 7, 15 and 25 degrees C for 5 and 10 min. The influences of such treatments on some quality parameters (the changes of colour, TBA and TMA values) were studied. These parameters were determined for cold smoked salmon suitable combinations (at 220-250 MPa, 3 degrees C for 5 min, at 330 MPa, 15 degrees C for 5 min and at 250 MPa, 25 degrees C for 10 min). In the second stage the shelf life of cold smoked salmon HP treated at 250 MPa, 3 degrees C...
Effect of synthesis media pH and gel separation technique on properties of copper incorporated SBA-15 catalyst Akti, Filiz; Balci, Suna; Doğu, Timur (2019-10-01) Cu-SBA-15 catalysts were synthesized hydrothermally under acidic and slightly higher acidic conditions via solid separation by either gel filtration or evaporation. XRD (X-ray diffraction) patterns and HRTEM (high resolution transmission electron microscopy) images showed that metal loading caused little changes in the ordered structure of SBA-15. Characteristic structural SBA-15's bonds and acid sites were observed in FTIR (Fourier transform infrared) spectrums and synthesis under high pH was created chang...
Performance of rectangular fins on a vertical base in free convection heat transfer Yazıcıoğlu, Burak; Yüncü, Hafit; Department of Mechanical Engineering (2005) The steady-state natural convection heat transfer from vertical rectangular fins extending perpendicularly from vertical rectangular base was investigated experimentally. The effects of geometric parameters and base-to-ambient temperature difference on the heat transfer performance of fin arrays were observed and the optimum fin separation values were determined. Two similar experimental set-ups were employed during experiments in order to take measurements from 30 different fin configurations having fin le...

Citation Formats

M. Ermis, E. T. Baran, T. Dursun, E. Antmen Altunsoy, and V. Hasirci, “CONTRIBUTION OF PHYSICAL FORCES ON THE DESIGN OF BIOMIMETIC TISSUE SUBSTITUTES,” BIO-INSPIRED MATERIALS FOR BIOMEDICAL ENGINEERING, pp. 59–76, 2014, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/52589.