PHYSICAL-PROPERTIES OF SOLID-SOLUTIONS BASED ON CDS IN THE SYSTEM SB2SE3 CDS

Date

1990-11-01

Author

SAFAROV, MG
ORUDZHEV, NM
Mehrabov, Amdulla

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

48
views

0
downloads

URI

https://hdl.handle.net/11511/53540

Journal

INORGANIC MATERIALS

Collections

Department of Metallurgical and Materials Engineering, Article

Suggestions

OpenMETU
Core

PHYSICAL-PROPERTIES OF SOLID-SOLUTIONS BASED ON BI2TE3 IN THE BI2TE3-GATE SYSTEM SAFAROV, MG; ORUDZHEV, NM; Mehrabov, Amdulla (1991-03-01)
Design of Double Sided Linear Motor with Easy to Manufacture Hairpin Plate Winding Çakal, Gökhan; Keysan, Ozan (2019-01-01) This paper presents a double sided permanent magnet linear synchronous motor (DSPMLSM) with novel V-shaped hairpin plate windings and diagonally placed square magnets. Unlike the conventional stranded round wires, proposed winding type offers easy manufacturing and high current densities. Air cored structure eliminates problems related to cogging torque. In order to obtain fast results, analytical magnetic field model of the motor is derived using magnetic scalar potential and verified with finite element a...
Physical Properties of Extrudates After Microfluidized Onion Skin Addition Bilgin, Elçin; Şensoy, İlkay; Mert, Behiç (2016-04-18)
VIBRATION OF MINDLIN PLATES SYMMETRICALLY COLUMN-SUPPORTED AT 4 POINTS AKSU, G (Elsevier BV, 1993-09-17) This paper deals with the free vibration characteristics of Mindlin plates that are symmetrically column-supported at four points. The finite difference technique, based on the energy approach, is used. The first lowest four natural frequency parameters are determined for various values of the finite area of the column supports. Detailed results are given for various values of relative thickness ratio and the effects of transverse shear deformation and rotary inertia are examined.
Mechanical performance of composite flat specimens and pressure vessels produced by carbon/epoxy towpreg dry winding Okten, Yigit Kemal; Kaynak, Cevdet (2022-10-01) The main purpose of this study is to evaluate the effects of certain processing parameters on the mechanical performance of carbon/epoxy towpreg wound composite structures. For this purpose, composite sample productions and their evaluations were conducted in two steps. In the first step, dry winding of carbon/epoxy towpregs was used to produce flat composite plates. Their evaluation was performed by rheological analysis, interlaminar shear tests, and unidirectional tensile tests. In the second step, towpre...

Citation Formats

M. SAFAROV, N. ORUDZHEV, and A. Mehrabov, “PHYSICAL-PROPERTIES OF SOLID-SOLUTIONS BASED ON CDS IN THE SYSTEM SB2SE3 CDS,” INORGANIC MATERIALS, pp. 1945–1947, 1990, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/53540.