OTF Analysis of a Spaceborne CMOS Imaging Sensor

Date

2017-06-22

Author

Alici, Kamil Boratay
Karci, Ozgur
Yilmaz, Ahmet Serdar
Ozdemir, Ceyda
Öktem, Sevinç Figen
Selimoglu, Ozgur

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

70
views

0
downloads

We present the optical transfer function (OTF) analysis of a spaceborne imaging sensor. This includes the effects of detector footprint, diffusion, smear, jitter, sampling, and time delay and integration. Each effect is analyzed under various design choices one of which corresponds to our designed complementary metal-oxide semiconductor imaging sensor. Effect of each subsystem is separately demonstrated using OTF values and corresponding degradation on a test image.

Subject Keywords

Image chain simulation, Optical transfer function, Complementary metal oxide semiconductor, Detector, Footprint, Diffusion, Smear, Jitter, Sampling, Time delay and integration

URI

https://hdl.handle.net/11511/53860

Collections

Department of Electrical and Electronics Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

A low-cost small pixel uncooled infrared detector for large focal plane arrays using a standard CMOS process Eminoglu, S; Tanrikulu, MY; Tezcan, DS; Akın, Tayfun (2002-04-03) This paper reports the development of a low-cost, small pixel uncooled infrared detector using a standard CMOS process. The detector is based on a suspended and thermally isolated p(+)-active/n-well diode whose forward voltage changes due to an increase in the pixel temperature with absorbed infrared radiation. The detector is obtained with simple post-CMOS etching steps on dies fabricated using a standard n-well CMOS process. The post-CMOS process steps are achieved without needing any deposition or lithog...
A CMOS switched-capacitor interface circuit for an integrated accelerometer Külah, Haluk; Najafi, K (2000-01-01) This paper presents a CMOS interface electronics for monolithic micromachined capacitive accelerometer systems. The interface electronics is a fully differential switched-capacitor charge integrator with its internal clock generator and sensor feedback circuit for closed-loop operation. The circuit is designed for open-loop and closed-loop operations, and provides both digital and differential analog outputs. One of the main advantages of this chip is that it can be monolithically integrated with the sensor...
High performance HgCdTe photodetector desings via dark current suppression Özer, Yiğit; Kocaman, Serdar; Department of Electrical and Electronics Engineering (2018) This thesis work covers the numerical analysis and design of infrared photon detectors with a focus of HgCdTe based devices. An in-house numerical tool is utilized for the design and characterization process, where the Poisson, current and continuity equations are solved numerically with the high precision in electrical and optical properties. A high operating temperature alternative substrate mid-wave HgCdTe detector is designed benefiting from the generation-recombination dark current suppression. The adv...
Utilization of motor current based torque feedback to improve the transparency of haptic interfaces Baser, Ozgur; Konukseven, Erhan İlhan (2012-06-01) In this paper motor current based torque feedback compensator is utilized in actuator space together with a closed loop impedance control algorithm instead of model based compensator to improve the transparency performance of haptic interfaces; moreover, a novel transparency evaluation metric is developed to evaluate the transparency performance of these devices. The proposed control algorithm is experimentally tested on a 1 DOF haptic device by employing a low-cost current sensor. It is also tested on a MA...
A readout circuit for QWIP infrared detector arrays using current mirroring integration Tepegoz, M; Akın, Tayfun (2003-09-18) This paper reports a current mirroring integration (CMI) CMOS readout circuit for high-resolution Quantum Well Infrared Photodetectors (QWIPs). The circuit uses a feedback structure with current mirrors to provide stable bias voltage across the photodetectors, which can be adjusted between 0 V and 3.5V. The photodetector current is mirrored to an integration capacitor which can be placed outside of the unit pixel, reducing the pixel area and allowing to integrate the current on larger capacitances for large...

Citation Formats

K. B. Alici, O. Karci, A. S. Yilmaz, C. Ozdemir, S. F. Öktem, and O. Selimoglu, “OTF Analysis of a Spaceborne CMOS Imaging Sensor,” 2017, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/53860.