EFFECT OF CARBON-DIOXIDE ON PVT BEHAVIOR OF WATER BELOW 150-DEGREES-C

Date

1988-10-12

Author

Parlaktuna, Mahmut

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

34
views

0
downloads

URI

https://hdl.handle.net/11511/54096

Collections

Department of Petroleum and Natural Gas Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Effect of recycled cement concrete content on rutting behavior of asphalt concrete Gul , Waqar Ahmed; Güler, Murat; Department of Civil Engineering (2008) Disposed waste materials remained from demolished buildings have been an environmental problem especially for developing countries. Recycled Cement Concrete (RCC) is one of the abundant components of waste materials that include quality aggregates. Use of RCC in asphalt concrete pavements is economically a feasible option as it not only helps in recycling waste materials but also preserves natural resources by fulfilling the demand for quality aggregate in pavement constructions. However, due to variability...
Effect of Feed Rate on Tool Wear in Milling of Al-4% Cu/B(4)C(p) Composite Ubeyli, Mustafa; ACIR, Adem; Karakas, M. Serdar; Ögel, Bilgehan (Informa UK Limited, 2008-01-01) The effect of feed rate on tool wear in milling of B(4)C(p) reinforced aluminum metal matrix composites (MMCs), produced by liquid phase sintering method, was investigated. Milling experiments on these composites were conducted with three different types of cementide carbide tools (uncoated, double coated (TiN+TiAlN) and triple coated (TiCN+Al(2)O(3)+TiN)) for three different feed rates of 0.15mm/z, 0.20mm/z, and 0.25mm/z. After milling experiments, an optical microscope was used to measure the magnitude of...
Effect of relative humidity of reactant gases on proton exchange membrane fuel cell performance Özsan, Burcu; Eroğlu, İnci; Department of Chemical Engineering (2012) Fuel cells are expected to play a major role in the economy of this century and for the foreseeable future. The use of hydrogen and fuel cells can address critical challenges in all energy sectors like commercial, residential, industrial, and transportation. Fuel cells are electrochemical devices that convert energy of a chemical reaction directly into electrical energy by combining hydrogen fuel with oxygen from air. If hydrogen is used as fuel, only byproducts are heat and water. The objective of this the...
EFFECT OF SALT-WATER FOG ON FATIGUE CRACK-GROWTH BEHAVIOR OF 7050-ALUMINUM ALLOY IN DIFFERENT ORIENTATIONS Gürbüz, Rıza; SCHUTZ, W (1991-02-15) The fatigue crack growth behaviour of 7050 T73651 high strength aluminium alloy that was originally developed for the aircraft industry was investigated in this study. The tests were conducted by using C-T specimens machined in six orientations under the action of constant amplitude sinusoidal load cycles. The tests were first carried out in laboratory air and then repeated in salt-water fog of a 5% NaCl solution to observe the effect of the environment on the fatigue crack growth behaviour. The experime...
Effect of nanowire length on device performance of n In2Se3 p Si nanowire heterojunctions T P1 85 Coşkun, Emre; Güllü, Hasan Hüseyin; Bayraklı, Özge; Parlak, Mehmet (2016-05-05)

Citation Formats

M. Parlaktuna, “EFFECT OF CARBON-DIOXIDE ON PVT BEHAVIOR OF WATER BELOW 150-DEGREES-C,” 1988, vol. 12, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/54096.