Hydromechanics of Slug Motion in a Voided Line

Frictionless double contact problem for an axisymmetric elastic layer between an elastic stamp and a flat support with a circular hole Mert, Oya; Geçit, M. Ruşen; Department of Engineering Sciences (2011) This study considers the elastostatic contact problem of a semi-infinite cylinder. The cylinder is compressed against a layer lying on a rigid foundation. There is a sharp-edged circular hole in the middle of the foundation. It is assumed that all the contacting surfaces are frictionless and only compressive normal tractions can be transmitted through the interfaces. The contact along interfaces of the elastic layer and the rigid foundation forms a circular area of which outer diameter is unknown. The probl...
Free vibration analysis of anisotropic laminated composite shells of revolution Yavuzbalkan, Erdem; Kayran, Altan; Department of Aerospace Engineering (2005) In this thesis, the free vibration analysis of anisotropic laminated composite shells of revolution (ALCSOR) is studied. The governing equations are kinematic, constitutive, and motion equations. Geometrically linear strain-displacement equations of Reissner-Naghdi shell theory in combination with first-order shear deformation theory in which transverse shear and rotatory inertia effects are taken into consideration. The constitutive relations are for macrosopically ALCSOR in which statically equivalent for...
Filmwise condensation over a tier of sphere Çobanoğlu, Tamer; Yamalı, Cemil; Department of Mechanical Engineering (2006) The objective of this study is to determine the mean heat transfer coefficient and heat transfer rate and to analyse the effect of inclination angles,the effect of subcooling temperatures and the effect of vapour velocity for laminar filmwise condensation of water vapour on a vertical tier of spheres experimentaly and analyticaly. For this purpose, the experimental aparatus were designed and manufactured. In the free condensation experimental study Ø50mm and Ø60 mm O.D. spheres were used to analyse the diam...
Mechanics (20151 Phys109 ) Özpineci, Altuğ(2015-10-7) Screen recordings of the Phys109 Mechanics lectures in the 20151 semester
Modeling of paint flow rate flux for circular paint sprays by using experimental paint thickness distribution Balkan, Raif Tuna; Arıkan, Mehmet Ali Sahir (1999-09-01)

Citation Formats

Z. Bozkuş, “Hydromechanics of Slug Motion in a Voided Line,” 1992, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/54552.