Effect of pH, temperature and ionic strength on the self-aggregation of poly(2-isopropyl-2-oxazoline)

2017-08-24
Çağlı, Eda
Erel Göktepe, İrem

Suggestions

Effect of temperature and isomorphic atom substitution on optical absorption edge of TlInS2xSe2(1-x) mixed crystals (0.25 <= x <= 1)
Hasanlı, Nızamı (Wiley, 2010-05-01)
The optical properties of the TlInS2xSe2(1-x) mixed crystals (0.25 <= x <= 1) have been investigated through the transmission and reflection measurements in the wavelength range of 400-1100 nm. The optical indirect band gap energies were determined by means of the analysis of the absorption data. It was found that the energy band gaps decrease with the increase of selenium atoms content in the TlInS2xSe2(1-x) mixed crystals. The transmission measurements carried out in the temperature range of 10-300 K reve...
Effect of activaiton degree on the pore size distribution and mechanical strength of activated carbons apricot stone origin
Özbayoğlu, Mehmet Fatih; Arol, Ali İhsan; Department of Mining Engineering (1996)
Effect of particle size on heat of hydration of pozzolan incorporated cements /
Ardoğa, Mehmet Kemal; Tokyay, Mustafa; Erdoğan, Sinan Turhan; Department of Civil Engineering (2014)
Hydration reactions, the chemical reactions between cement and water are exothermic. The determination of the heat of hydration and rate of heat evolution of cement are extremely important to understand the hydration mechanism. In this study, clinker and gypsum rock were ground after adding natural pozzolan (trass) with various proportions until a specific fineness value and different cements were obtained. These cements were divided into particle size groups with a sonic sifter and the heat of hydration an...
Effect of temperature on fatigue properties of Din 35 NiCrMoV 12 5 steel
Önem, Orkun Umur; Gürbüz, Rıza; Department of Metallurgical and Materials Engineering (2003)
DIN 35NiCrMoV125 (equivalent to AISI 4340), which is a high strength low alloy steel (HSLA), is mainly used at military applications in the production of gun barrels. The main aim of this study was to determine the low cycle fatigue (LCF) behaviour and the influence of temperature on low cycle fatigue failure properties of that steel. Three different temperatures (room temperature, 2500C and 4000C) were used in the experiments in order to analyze the effect of temperature. For each temperature, five strain ...
EFFECT OF BUILD DIRECTION ON CRACK GROWTH BEHAVIOR OF Ti6Al4V ALLOY MANUFACTURED BY ELECTRON BEAM MELTING
Çalık, Feyziye; Gürbüz, Rıza; Department of Metallurgical and Materials Engineering (2022-12-01)
The effects of build orientation on the crack propagation behavior of Ti6Al4V fabricated by elecron beam melting which is one of metal additive manufacturing methods were examined in this study. Firstly, Ti6Al4V blocks were manufactured at different building angles (00,300,450and 900) regarding as base plane using EBM. Subsequently, test specimens were machined from these blocks in compliance with ASTM E8, ASTM E399 and ASTM E647 standards for tensile, fracture toughness and crack growth rate specimen...
Citation Formats
E. Çağlı and İ. Erel Göktepe, “Effect of pH, temperature and ionic strength on the self-aggregation of poly(2-isopropyl-2-oxazoline),” 2017, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/54899.