Load transfer capacity of doweled joints in concrete roads under static loading.

Date

1971

Author

Tarım, Güzin

Metadata

Show full item record

Item Usage Stats

112
views

0
downloads

URI

https://hdl.handle.net/11511/5491

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Load rating of concrete-deck-on-steel-stringer bridges using field-calibrated 2D-grid models Türer, Ahmet (Elsevier BV, 2011-04-01) This paper presents and discusses issues related to structural identification, calibrated model-based load rating, and sensitivity of rating to the analytical model, along with experimental studies conducted on an existing concrete-deck-on-steel-stringer bridge. The proposed model-updating procedure uses collected dynamic data (mode shapes, modal frequencies, and order of modes) as well as static deformed shape information. Two-dimensional (2D) grid models were developed to successfully simulate the transve...
Stress resultants for wind girders in open-top cylindrical steel tanks Zeybek, Ozer; Topkaya, Cem; Rotter, J. Michael (Elsevier BV, 2019-10-01) Empty open-top cylindrical steel tanks are susceptible to buckling when subjected to external pressure due to wind or partial vacuum due to blocked vents. A "wind girder" is commonly used at the top of the tank wall to increase its strength against external pressure instability. The wind pressure varies around the circumference of the tank, but is relatively constant up its height. A series of cosine functions is typically used to describe the variation of wind pressure around the circumference. Expressions...
Stress Scaling Factors for Seismic Soil Liquefaction Engineering Problems: A Performance-Based Approach Çetin, Kemal Önder; Bilge, Habib Tolga (2013-06-19) Most of the widely used seismic soil liquefaction triggering methods propose cyclic resistance ratio (CRR) values valid at the reference normal effective stress (sigma(v,0)') of one atmosphere and zero static shear stress (tau(st,0)) states. Then, a series of correction factors are applied on this reference CRR, for the purpose of assessing the variability due to normal effective and static shear stress states (i.e. K-sigma and K-alpha corrections) acting on the horizontal plane. In the literature, a number...
Stress analysis in welded butt joints. Aydın, Erol; Department of Mechanical Engineering (1989)
Load Torque Estimation for Spindle Drives Using Structured Neural Network Topologies Dölen, Melik; Lorenz, Robert (null; 2001-11-07)

Citation Formats

G. Tarım, “Load transfer capacity of doweled joints in concrete roads under static loading.,” Middle East Technical University, 1971.