A NEW GRADIENT APPROXIMATION METHOD FOR THE DESIGN OF MINMAX FIR FILTERS WITH POWERS OF 2 COEFFICIENTS

1994-04-14

Suggestions

A New modal superposition method for nonlinear vibration analysis of structures using hybrid mode shapes
Ferhatoğlu, Erhan; Özgüven, Hasan Nevzat; Ciğeroğlu, Ender; Department of Mechanical Engineering (2017)
In this thesis, a new modal superposition method based on a hybrid mode shape concept is developed for the determination of steady state vibration response of nonlinear structures. The method is developed specifically for systems having nonlinearities where the stiffness of the system may take different limiting values. Stiffness variation of these nonlinear systems enables one to define different linear systems corresponding to each value of the limiting equivalent stiffness. Moreover, the response of the ...
A new modal superposition method for nonlinear vibration analysis of structures using hybrid mode shapes
Ferhatoglu, Erhan; Ciğeroğlu, Ender; Özgüven, Hasan Nevzat (Elsevier BV, 2018-07-01)
In this paper, a new modal superposition method based on a hybrid mode shape concept is developed for the determination of steady state vibration response of nonlinear structures. The method is developed specifically for systems having nonlinearities where the stiffness of the system may take different limiting values. Stiffness variation of these nonlinear systems enables one to define different linear systems corresponding to each value of the limiting equivalent stiffness. Moreover, the response of the n...
A new 3D FEM formulation for the solution of potential fields in magnetic induction problems
Tek, Mustafa; Gençer, Nevzat Güneri (1997-11-02)
Time-varying magnetic fields are applied to living tissues for different purposes in medicine. For all applications, the induced current distributions must be accurately estimated in order to obtain the desired medical results. In this study a new 3D finite element method (FEM) formulation is derived. A code is prepared to implement these formulations using 20 noded isoparametric cubic elements. The accuracy of solutions is tested for three simple geometries and series expansion method is used to derive ana...
A new formulation for the analysis of bonded elastic layers
Pınarbaşı, Seval; Akyüz, Uğurhan; Department of Civil Engineering (2007)
Elastic layers bonded to reinforcing sheets are widely used in many engineering applications, e.g., as elastic foundations to machinery, as seismic isolators to structures, etc. Because of its practical importance, the behavior of bonded elastic layers under some basic deformation modes (e.g., compression, bending and shear modes) has attracted the attention of many researchers. However, the analytical works available in literature involve, with the object of obtaining design formulas, many simplifying assu...
A new jacobian matrix calculation method to decrease computational time in periodic force response analysis of nonlinear structures
Kızılay, Hazım Sef; Ciğeroğlu, Ender; Department of Mechanical Engineering (2019)
The contact interfaces between the components used in high speed systems such as the turbo machinery cause nonlinear vibrations. In order to understand the dynamic characteristic of nonlinear systems, it is important to perform nonlinear vibration analysis. In nonlinear vibration analysis, due to the properties of nonlinear elements used, it is not possible to calculate the Jacobian matrix analytically or it becomes very complicated and difficult, therefore, Jacobian matrix is calculated as numerically. In ...
Citation Formats
T. Çiloğlu, “A NEW GRADIENT APPROXIMATION METHOD FOR THE DESIGN OF MINMAX FIR FILTERS WITH POWERS OF 2 COEFFICIENTS,” 1994, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/54931.