An experimental and theoretical investigation of the thermosyphon solar water heater

Download
362134.pdf
1985
Erdoğan, İlyas
Show full item record
129
views
160
downloads
https://hdl.handle.net/11511/5572
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

An experimental and numerical investigation of spray atomization in liquid-propellant rocket engines
Gülmez, Senem; Kahveci, Harika Senem; Department of Aerospace Engineering (2021-9-10)
Since the liquid rocket engines have been widely used in various flight applications, improving the efficiency and stability of those engines have become important. To achieve efficient combustion in the chamber, the injector must be carefully designed and characterized well. Although impinging jet injectors are widely used in several systems, the previous researches focused on mainly the characterization of like-doublets, thus, there is still a lack of understanding on the atomization of the other types of...
An experimental investigation of part load problems in centrifugal pumps
Ali, Nasir Waquar; Eralp, O. Cahit; Department of Mechanical Engineering (1989)
An Experimental and numerical investigation of warpage behavior of silicon substrates at cryogenic temperatures
Baloğlu, Eyüp Can; Okutucu Özyurt, Hanife Tuba; Dursunkaya, Zafer; Department of Mechanical Engineering (2016)
Surface deformations and thermal stress behavior of microelectronic devices that operate at cryogenic temperatures (less than 120 K) and under vacuum conditions are important phenomena that aff ect the reliability requirements of such components. Excessive deformation and thermal stress on these devices may result in interconnect failure, performance degradation or other direct mechanical failure of one or more components. To obtain reliable products, surface deformations, named as warpage most widely, and ...
An experimental and analytical investigation of cam follower jump phenomenon
Şen, Şölen; Çalışkan, Mehmet; Department of Mechanical Engineering (1987)
An investigation on the performance optimization of an alkaline fuel cell
Ergul, MT; Turker, L; Eroğlu, İnci (1997-10-01)
A fuel cell test module was designed and constructed to determine the performance of an alkaline fuel cell. The sim was to optimize its performance by changing some of its parameters and to integrate it with a hydrogen photobioreactor in future. The fuel cell was a single cell, hydrogen-oxygen, aqueous electrolyte type. The performance characteristics of the cell have been investigated. The electrodes were multilayer Teflon bonded gas diffusion type and were prepared by the rolling method. Active carbon or ...
Citation Formats
İ. Erdoğan, “An experimental and theoretical investigation of the thermosyphon solar water heater,” Middle East Technical University, 1985.
METU IIS - Integrated Information Service open@metu.edu.tr