Mediterranean Combustion Symposium - 20-25 June 1999, Antalya, Turkey - Preface

Date

2000-01-01

Author

Baretta, F
Selçuk, Nevin

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

68
views

0
downloads

Subject Keywords

Thermodynamics, Energy and fuels, Engineering, multidisciplinary, Engineering, chemical

URI

https://hdl.handle.net/11511/56057

Journal

COMBUSTION SCIENCE AND TECHNOLOGY

Collections

Graduate School of Natural and Applied Sciences, Article

Suggestions

OpenMETU
Core

Preface - Fifth Mediterranean Combustion Symposium Beretta, Federico; Selçuk, Nevin; Mansour, Mohy S. (2008-01-01)
Ninth Mediterranean Combustion Symposium PREFACE Selçuk, Nevin; Mansour, Mohy S.; D'Anna, Andrea (2016-01-01) The Ninth Mediterranean Combustion Symposium, jointly co-sponsored by the Combustion Institute and the International Centre for Heat and Mass Transfer, was held in Rhodes, Greece, in June 2015. It was built on the success of eight previous meetings held in Antalya, Turkey in June 1999, in Sharm El-Sheikh, Egypt in January 2002, in Marrakech, Morocco in June 2003, in Lisbon, Portugal in October 2005, in Monastir, Tunisia in eptember 2007, in Corsica, France in June 2009, in Sardinia, Italy in September 2011,...
Experimental thermal performance characterization of flat grooved heat pipes Alijani, Hossein; Çetin, Barbaros; Akkuş, Yiğit; Dursunkaya, Zafer (TAYLOR & FRANCIS INC, 530 WALNUT STREET, STE 850, PHILADELPHIA, PA 19106 USA, 2015-06-15) The thermal characterization of aluminum flat grooved heat pipes is performed experimentally for different groove dimensions. Three heat pipes with groove widths of 0.2 mm, 0.4 mm, and 1.5 mm are used in the experiments. The effect of the amount of the working fluid is extensively studied for each groove width. The results reveal that, although all three succeed in dissipating the heat input through the phase change of the working fluid by continuous evaporation and condensation, the effectiveness of the he...
Stability analysis of constraints in flexible multibody systems dynamics İder, Sıtkı Kemal (Elsevier BV, 1990-1) Automated algorithms for the dynamic analysis and simulation of constrained multibody systems assume that the constraint equations are linearly independent. During the motion, when the system is at a singular configuration, the constraint Jacobian matrix possesses less than full rank and hence it results in singularities. This occurs when the direction of a constraint coincides with the direction of the lost degree of freedom. In this paper the constraint equations for deformable bodies are modified for use...
Finite anti-plane shear of compressible hyperelastic tubes Erarslanoğlu, G.; Ertepınar, A. (Elsevier BV, 1990-1) Finite, anti-plane shear of a long, hyperelastic, compressible circular cylindrical tube is investigated using the theory of finite elasticity. The highly nonlinear, coupled, ordinary differential equations with variable coefficients governing the problem are solved numerically using the method of adjoints. The effect of the compressibility of the material is studied in several numerical examples.

Citation Formats

F. Baretta and N. Selçuk, “Mediterranean Combustion Symposium - 20-25 June 1999, Antalya, Turkey - Preface,” COMBUSTION SCIENCE AND TECHNOLOGY, pp. 1–2, 2000, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/56057.