Vibration and noise analysis of textile spindles.

Date

1986

Author

Kahraman, Ahmet

Metadata

Show full item record

Item Usage Stats

147
views

0
downloads

URI

https://hdl.handle.net/11511/5607

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Vibration analysis of damped structures and structural reanalysis using a new structural modification method. Tahtalı, Murat; Özgüven, Hasan Nevzat; Department of Mechanical Engineering (1992)
Vibration analysis of cracked beams on elastic foundation using Timoshenko beam theory Batıhan, Ali Çağrı; Kadıoğlu, Fevzi Suat; Department of Mechanical Engineering (2011) In this thesis, transverse vibration of a cracked beam on an elastic foundation and the effect of crack and foundation parameters on transverse vibration natural frequencies are studied. Analytical formulations are derived for a beam with rectangular cross section. The crack is an open type edge crack placed in the medium of the beam and it is uniform along the width of the beam. The cracked beam rests on an elastic foundation. The beam is modeled by two different beam theories, which are Euler-Bernoulli be...
Vibration analysis of washing machines in the drum plane Baykal, Cem; Ciğeroğlu, Ender; Yazıcıoğlu, Yiğit (Springer, Cham; 2019-02-20) In this study, a nonlinear mathematical model for drum-type washing machines is developed considering rotating unbalance type excitation. Nonlinear differential equations of motion are converted into a set of nonlinear algebraic equations by using harmonic balance method (HBM). The resulting nonlinear algebraic equations are solved by using Newton’s method with arc-length continuation. Several case studies are performed in order to observe the effects of orientation angles of springs and dampers supporting ...
Vibration analysis of structures using substructure synthesis Çetinkaya, Nadir; Özgüven, Hasan Nevzat; Çalışkan, Mehmet; Department of Mechanical Engineering (1989)
Vibration and acoustic numerical analysis of gregorian type communication antenna planted on communication satellite Karaoğlu, Onur Kaan; Özer, Mehmet Bülent; Department of Mechanical Engineering (2020) The acoustic load during lift-off of the spacecraft rockets is one of the most destructive loads especially for the light and large space structures. This thesis mainly focuses on vibro-acoustic behavior of a large composite reflector satellite antenna. The study starts with manufacturing processes, material properties and design criteria of the antenna which is Gregorian type with two reflectors. Then, Finite Element Model (FEM) of the antenna which is prepared in HyperMesh is analyzed structurally with ca...

Citation Formats

A. Kahraman, “Vibration and noise analysis of textile spindles.,” Middle East Technical University, 1986.