Effect of ethanol and gasoline blends on exhaust gas emissions in S.I. engines

Download
1988
Farooq, Ahmed

Suggestions

Effect of recycled cement concrete content on rutting behavior of asphalt concrete
Gul , Waqar Ahmed; Güler, Murat; Department of Civil Engineering (2008)
Disposed waste materials remained from demolished buildings have been an environmental problem especially for developing countries. Recycled Cement Concrete (RCC) is one of the abundant components of waste materials that include quality aggregates. Use of RCC in asphalt concrete pavements is economically a feasible option as it not only helps in recycling waste materials but also preserves natural resources by fulfilling the demand for quality aggregate in pavement constructions. However, due to variability...
Effect of biomass pretreatment conditions on the glucose and biodegradable film production from lignocellulosic wastes
Bahçegül, Erinç; Bölükbaşı, Ufuk; Özkan, Necati; Department of Biotechnology (2013)
Process parameters during the conversion of lignocellulosic agricultural wastes including corn cobs and cotton stalk into glucose and biodegradable polymeric materials were investigated. The investigated parameters were pretreatment type, pretreatment temperature, lignocellulosic biomass particle size prior to pretreatment, hemicellulose extraction temperature, salt type, salt concentration and polymer processing technique. Pretreatments applied to corn cobs including dilute acid, alkaline and ionic liquid ...
Effect of added ingredients on the acrylamide level and quality of extrudates
Yavuz, Merve; Şensoy, İlkay; Özçelik, Beraat; Department of Food Engineering (2014)
Ingredients which are NaCl, CaCl2, ascorbic acid, citric acid, glycine, cysteine and quercetin were blended at two different concentrations with whole wheat flour, mixed with D-glucose monohydrate (100:5, w/w), and fed to twin screw extruder. Effect of these ingredients on acrylamide level and quality characteristics of extrudates were investigated. Set zone temperatures were 80 ± 2, 90 ± 2, 115 ± 2 and 150 ± 2 oC with 180 rpm screw speed and feed flow rate of 30 g/min during extrusion. Feed moisture conten...
Effect of different flours on quality of gluten-free wafer sheet
Mert, Selen; Şahin, Serpil; Şümnü, Servet Gülüm; Department of Food Engineering (2014)
Lifelong gluten-free diet is essential for patients having celiac disease. Since wheat flour contains gluten, it is necessary to replace wheat flour with other types of gluten-free flours. Rice flour is commonly used in gluten-free baked products as an alternative to wheat flour. The main objective of this study was to develop gluten-free wafer sheet formulations by replacing rice flour partially with different gluten-free flours at different ratios. Rice-corn flour blends, rice-buckwheat flour blends and r...
Effect of tomato, red pepper and carrot pulp addition on the quality of extrudates
Çaltinoğlu, Çağla; Şensoy, İlkay; Mert, Behiç; Department of Food Engineering (2014)
Effects of tomato pulp, red pepper pulp and carrot pulp addition on the quality parameters of the corn grit extrudates were investigated. Addition of tomato pulp had no statistically significant effect on longitudinal expansion index, volume expansion index, bulk density and porosity values of the extrudates, however, a decrease was observed in sectional expansion index with the addition of tomato pulp. Sectional expansion index indicated no statistically significant difference with the addition of red pepp...
Citation Formats
A. Farooq, “Effect of ethanol and gasoline blends on exhaust gas emissions in S.I. engines,” Middle East Technical University, 1988.