Construction of an experimental set-up for millimetric waves.

1978
Güçeri, Mustafa Cem

Suggestions

Design of a complex modulus test system for viscoelastic materials.
Erdoğan, Bilgeha; Özgen, Gökhan O..; Department of Mechanical Engineering (2019)
In this thesis, the design of test devices for dynamic characterization of elastomer materials and elastomer vibration control components are designed. For this purpose, two different studies are conducted. In the first study, an already installed test setup is modified to provide preloading capability. In the second study, a completely new test setup is established. Conceptual design studies are carried out based on the information obtained in the literature and related standards, then the validity of the ...
Construction of Efficient Codes for High-Order Direct Sum Masking
Carlet, Claude; Guılley, Sylvain; Güneri, Cem; Mesnager, Sihem; Özbudak, Ferruh (IOS Press, 2020-03-01)
Linear complementary dual (LCD) codes and linear complementarypairs (LCP) of codes have been proposed as counter-measures against side-channelattacks (SCA) and fault injection attacks (FIA) in the context of direct sum masking(DSM). Although LCD codes were introduced by Massey long ago for otherreasons, there has been a renewed interest in coding theory community for thesekinds of codes due to these new applications. It has later been observed that thecounter-measure against FIA may possibly lead to a vulne...
CONSTRUCTION OF A QUADRATIC MODEL USING MODIFIED ANGSTROM COEFFICIENTS TO ESTIMATE GLOBAL SOLAR-RADIATION
Akınoğlu, Bülent Gültekin (Elsevier BV, 1990-01-01)
In this paper, a new correlation for the estimation of monthly average daily global solar radiation will be presented and compared with the correlations of Rietveld, Benson et al., Ögelman et al., and a recent formulation by Gopinathan. The overal results show that the quadratic form gives better performance in terms of global applicability. The new quadratic model should be preferred for the monthly average global solar radiation estimation when the data for bright sunshine hours are available
Construction of quality control charts with sub-optimal size samples
Ozilgen, M (1998-02-01)
A case study is presented for construction of the quality control charts with suboptimum size samples obtained in a commercial brewery after measuring total acidity, apparent extract and pH of the wort; alcohol, real extract, carbon dioxide total acidity and pH of the bottled beer. Logarithmic transformation of the data was employed to construct the quality control charts, and centering of the data between the specification limits was assessed by means of the process capability index values.
Construction of a test set-up for experimental evaluation of refrigerator condensers.
Okutucu, Tuba; Oskay, Rüknettin; İleri,Arif; Department of Mechanical Engineering (1999)
Citation Formats
M. C. Güçeri, “Construction of an experimental set-up for millimetric waves.,” Middle East Technical University, 1978.