Production planning and control by linear stochastic control techniques.

1981
Kayaligil, M Sinan
Show full item record
116
views
0
downloads
https://hdl.handle.net/11511/6180
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Production planning and machine sceduling in a job shop.
Mezheboğlu, Nedim; Department of Industrial Engineering (1976)
Production scheduling in two-stage parallel machine flow shops.
Akyel, Hüseyin Cemal; Department of Electrical Engineering (1986)
Production and stock management under manufacturer and customer driven substitution
Töre, Nurşen; Savaşaneril Tüfekci, Seçil; Department of Industrial Engineering (2014)
In this thesis, the stock management problem of a manufacturer is studied in the presence of product substitution flexibility. The study consists of two parts. In the first part, the manufacturer's joint production scheduling and product substitution decisions are analyzed. It is assumed that there are multiple substitutable items and for each item, and inventory is kept separately. If upon demand arrival, stock is not available, then demand is backordered. Depending on the inventory level, it is possible t...
Production optimization of a gas condensate reservoir using a black oil simulator and nodal system analysis: a case study
Mindek, Cem; Bağcı, Suat; Department of Petroleum and Natural Gas Engineering (2005)
In a natural gas field, determining the life of the field and deciding the best production technique, meeting the economical considerations is the most important criterion. In this study, a field in Thrace Basin was chosen. Available reservoir data was compiled to figure out the characteristics of the field. The data, then, formatted to be used in the commercial simulator, IMEX, a subprogram of CMG (Computer Modeling Group). The data derived from the reservoir data, used to perform a history match between t...
Production system optimization for submersible pump lifted wells : a case study
Güler, Nuri Ozan; Bağı, A. Suat; Department of Petroleum and Natural Gas Engineering (2004)
A computer program has been written to perform production optimization in submersible pump lifted wells.Production optimization was achieved by the principles of Nodal Analysis Technique which was applied between the reservoir and the wellhead ignoring the surface choke and separator.computer program has been written according to two lifting environment,which are:pumping with only liquid,pumping with both liquid and gas.
Citation Formats
M. S. Kayaligil, “Production planning and control by linear stochastic control techniques.,” Middle East Technical University, 1981.
METU IIS - Integrated Information Service open@metu.edu.tr