Finite element analysis of stoves

Download

006817.pdf

Date

1989

Author

Kılıç, Muhsin

Metadata

Show full item record

Item Usage Stats

62
views

0
downloads

URI

https://hdl.handle.net/11511/6228

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Finite element analysis of bending operation of aluminum profiles Penekli, Ufuk; Darendeliler, Haluk; Department of Mechanical Engineering (2008) Bending process is an important forming process in most industrial fields. Springback and cross-section distortion are commonly faced problems in bending process. Springback behavior of closed and open section beams changes with different parameters such as cross-section type, cross-section dimensions, bend radius and bend angle. For closed sections like tube, the dominating problem is cross-section distortion. The thickness of the tube at intrados (inner surface of tube being in contact with die) increases...
Finite element analysis of trimming process. İşbir, Serdar Ş; Darendeliler, Haluk; Gökler, Mustafa İlhan; Department of Mechanical Engineering (2002)
Finite element analysis of sheet pile walls Horoz, Atilla; Birand, Altay; Department of Civil Engineering (1988)
FINITE ELEMENT ANALYSIS OF PLANETARY GEAR SET FOR WIND TURBINES Koçlar, Yaşar Çağatay; ESAT, VOLKAN; Mechanical Engineering (2023-1-26) Planetary gear sets are utilized in various critical applications. Being one of these applications, investigation of wind turbine systems is essential to improve sub-systems such as planetary gearbox, yaw gear, and pitch system under different conditions. In this study, a new finite element model is proposed for obtaining the transient load on the gears of a planetary gearset, and examining the failure types. As an improvement, determination of critical loading scenario for gearset, modeling the blades as a...
Finite element analysis of fretting contact for dissimilar and nonhomogeneous materials Korkmaz, Yezdan M.; Çöker, Demirkan (Elsevier BV; 2017-09-07) Fretting problem arises in the case of relatively small sliding motion between contacting surfaces leading to reduction in fatigue life of these parts significantly. The purpose of this study is to investigate the effects of fretting on the contact region in a cylindrical on flat contact configuration. In order to identify fretting contact, a finite element (FE) model was constructed by using commercial finite element package ABAQUS (TM). Fretting contact is studied under two types of loading: tangential lo...

Citation Formats

M. Kılıç, “Finite element analysis of stoves,” Middle East Technical University, 1989.