Design and construction of a six degrees of freedom industrial robot

Download
007033.pdf
1989
Uludağ, Niyazi
Show full item record
90
views
0
downloads
https://hdl.handle.net/11511/6234
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Design and construction of a microwave plasma ion source
Çınar, Kamil; Bilikmen, Kadri Sinan; Department of Physics (2011)
This thesis is about the designing and constructing a microwave ion source. The ions are generated in a thermal and dense hydrogen plasma by microwave induction. The plasma is generated by using a microwave source with a frequency of 2.45 GHz and a power of 700 W. The generated microwave is pulsing with a frequency of 50 Hz. The designed and constructed microwave system generates hydrogen plasma in a pyrex plasma chamber. Moreover, an ion extraction unit is designed and constructed in order to extract the i...
Design and production of a mobile robot for university education
Öztürk, Doğu; Erden, Abdülkadir; Department of Mechanical Engineering (1997)
Design and construction of a multi-purpose robot gripper
Tüz, Mehmet Attila; Arıkan, M. A. Sahir; Balkan, Tuna; Department of Mechanical Engineering (1994)
Design and implementation of an oscilloscope and a signal generator using a personal computer
Köseoğlu, Mehmet Gökhan; Aşkar, Murat; Department of Electrical and Electronics Engineering (1989)
Design and implementation of an annular acoustic levitation system
Kandemir, Mehmet Hakan; Çalışkan, Mehmet; Department of Mechanical Engineering (2014)
In standing wave acoustic levitation technique, a standing wave is obtained between a source and a reflector. Particles can be attracted towards pressure nodes in standing waves owing to the spring action. Hence, particles can be suspended in air. This operation can be performed on continuous structures as well as in several numbers of axes. In this study an annular acoustic levitation set-up is designed and built. The set-up consists of two langevin type piezoelectric transducers, two waveguides, an annula...
Citation Formats
N. Uludağ, “Design and construction of a six degrees of freedom industrial robot,” Middle East Technical University, 1989.
METU IIS - Integrated Information Service open@metu.edu.tr