Investigation of dryout in narrow space

1989
Ülge, Ethem Tunç

Suggestions

Investigation of air bubble motion in counter-current water flow conditions
Bezdegümeli, Uğur; Yeşin, Ahmet Orhan; Department of Mechanical Engineering (2003)
In this thesis study, air bubble motion in counter-current water flow conditions in a vertical pipe is investigated experimentally. For this purpose, a test set-up was designed and constructed. Images of motions of single bubbles, having different diameters in the range of 3.0-4.8 mm, generated by specially designed bubble injectors were recorded by using a monochrome camera, an image capture card and a PC. Recorded video images were processed to obtain the necessary data for the The purpose of the study is...
Investigation of haptic manipulators with linear equations of motion
Kızılbey, Aras; Soylu, Reşit; Department of Mechanical Engineering (2019)
In this thesis, linearization of the equations of motion of haptic interfaces and the effects of such linearization on haptic applications are examined. Three and six DOF configurations of the Phantom Premium™ 1.5 have been selected as the haptic manipulators to be investigated. By utilizing the generic computer code that has been developed for hybrid manipulators composed of revolute and prismatic joints, the equations of motion for the aforementioned two haptic manipulator types are derived in symbolic fo...
Investigation of evaporation from a sessile constant shape droplet
Akkuş, Yiğit; Çetin, Barbaros; Dursunkaya, Zafer (null; 2017-08-31)
Investigation of low cycle fatigue in integral bridge steel h-piles under seismic displacement reversals
Dicleli, Murat (null; 2018-02-02)
INVESTIGATION OF INTERSONIC FRACTURE IN HIGLY CURVED COMPOSITE LAMINATES UNDER QUASI-STATIC LOADING
Gozluklu, B.; Uyar, I; Çöker, Demirkan (2014-07-25)
In wind energy and aerospace industries, new advances in composite manufacturing technology enable to produce primary load carrying elements as composite materials in wide variety of shapes large such as an L-shape. However, due to the geometry, Interlaminar Normal Stresses (ILNS) are induced once a moderately thick laminate takes highly curved shape. In the curved part of the L-shaped structure, the development of ILNS promotes mode-I type of delamination propagation which is the weakest fracture mode. Thi...
Citation Formats
E. T. Ülge, “Investigation of dryout in narrow space,” Middle East Technical University, 1989.