An analytical model for dropwise condensation including the effect of the substrate material

Download
008232.pdf
1989
Eser, Ayşe
Show full item record
82
views
0
downloads
https://hdl.handle.net/11511/6239
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

An Energetic Type Model for the Cross shore Distribution of Total Longshore Sediment Transport Rate
Baykal, Cüneyt; Güler, Işıkhan (2012-07-06)
This paper presents an energetic-based simple approach for the computation of cross-shore distribution of total longshore sediment transport (LST) rates. The proposed approach (Baykal 2012) follows similar assumptions with the given formula of Bayram et al. (2007) for the total LST rate (Qlst,t) across the surf zone and is applied to investigate the relation between the rate of dissipation in wave energy flux due to wave breaking and total longshore sediment flux using the available laboratory measurements ...
An approximate model for the dynamic analysis of thermoelastic cylindrical shells
Muneeb, Anwar-ul-Haq; Mengi, Yalçın; Birlik, Gülin; Department of Engineering Sciences (1990)
AN EMPIRICAL TORQUE NOISE AND SPIN-UP MODEL FOR ACCRETION-POWERED X-RAY PULSARS
Baykal, Altan (1993-01-01)
By using the first order autoregressive time series model, rotation histories of accretion-powered X-ray pulsars are modeled yielding a torque noise strength S(in) and the average secular spin-up term [OMEGA]. We find that Her X-1, Cen X-3, A0535 + 26, and Vela X-1 can be modeled with white torque-noise leading to random walks in pulse frequency; for the remaining sources the random walk model is also acceptable. Using this model we calculate the noise strengths in the frequency derivative and estimate the ...
An empirical method for design of grouted bolts in rock tunnels based on the Geological Strength Index (GSI)
Osgoui, Reza R.; Unal, Erdal (Elsevier BV, 2009-08-14)
The procedure presented in this paper has been developed for the design of grouted rock bolts in rock tunnels during preliminary design stage. The proposed approach provides a step-by-step procedure to set up a series of practical guidelines for optimum pattern of rock bolting in a variety of rock mass qualities. For this purpose, a new formula for the estimation of the rock load (support pressure) is recommended. Due to its wide-spread acceptance in the field of rock engineering, the Geological Strength In...
An analytical model for stress-strain behavior of confined concrete
Binici, Barış (Elsevier BV, 2005-06-01)
It is well known that the strength and ductility of concrete are highly dependent on the level of confinement provided by the lateral reinforcement. The stiffness and the constitutive behavior of the confining reinforcement (elastic, elastoplastic, etc.) are the important factors affecting the behavior of concrete. In this study, a new simple confined concrete model is developed for describing the axial and lateral deformation characteristics of concrete under triaxial compression. The stress-strain relatio...
Citation Formats
A. Eser, “An analytical model for dropwise condensation including the effect of the substrate material,” Middle East Technical University, 1989.
METU IIS - Integrated Information Service open@metu.edu.tr