An investigation into rolling element bearing diagnostics via digital signal processing

Download
007327.pdf
1989
Karakurt, M. Cem
Show full item record
47
views
0
downloads
https://hdl.handle.net/11511/6241
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

An Investigation of bainitic transformation in low carbon alloy and high carbon railway steels
Öztürk, Zeynep; Ögel, Bilgehan; Department of Metallurgical and Materials Engineering (2018)
In this thesis study, bainitic transformation in high carbon railway steel and boron steel was investigated. Bainitic structure known as having high strength and high toughness at the same time. Mechanical properties of bainite were compared with the tempered martensite phase which is commonly used phase in industry. R260 and 32CrB4 steels were used in this study. Different heat treatments were applied to these steels for bainitic transformation. Austenitization was done at 850°C for R260 steel and at 880°C...
An Investigation on hyperspectral image classifiers for remote sensing
Özdemir, Okan Bilge; Çetin, Yasemin; Department of Information Systems (2013)
Hyperspectral image processing is improved by the capabilities of multispectral image processing with high spectral resolution. In this thesis, we explored hyperspectral classification with Support Vector Machines (SVM), Maximum Likelihood (ML) and KNearest Neighborhood algorithms. We analyzed the effect of training data on classification accuracy. For this purpose, we implemented three different training data selection methods; first N sample selection, randomly N sample selection and uniformly N sample se...
An experimental investigation of sootshell formation in microgravity droplet combustion
MANZELLO, SAMUEL L; Yozgatlıgil, Ahmet; CHOI, MUN YOUNG (Elsevier BV, 2004-11-01)
Spherically symmetric droplet combustion experiments were performed at the NASA Glenn Research Center (GRC) 2.2 second drop tower in Cleveland, OH in an effort to better understand the mechanism leading to sootshell format on. Rapid insertion of a blunt plunger was used to remove the symmetric sootshell that formed during the period of quasi-steady burning. This allowed for the observation of sootshell re-formation. Soot particles were formed near the flame front and migrated towards the droplet to ultimate...
An investigation into the implementation of construction automation and robotics technologies for construction waste management
Kılıçkan Öztürk, Sabire Melek; Elias Özkan, Soofia Tahira; Department of Architecture (2022-8)
The construction industry is responsible for tons of construction waste. It is crucial to take the necessary precautions to avoid the impacts of construction waste on the environment. With the help of developments in automation technology and building information modeling systems, robotics in the construction industry is getting more common every day. It is argued that construction robots can be effective in the management of construction waste. This study aims first to understand the reasons for construct...
An investigation on the performance optimization of an alkaline fuel cell
Ergul, MT; Turker, L; Eroğlu, İnci (1997-10-01)
A fuel cell test module was designed and constructed to determine the performance of an alkaline fuel cell. The sim was to optimize its performance by changing some of its parameters and to integrate it with a hydrogen photobioreactor in future. The fuel cell was a single cell, hydrogen-oxygen, aqueous electrolyte type. The performance characteristics of the cell have been investigated. The electrodes were multilayer Teflon bonded gas diffusion type and were prepared by the rolling method. Active carbon or ...
Citation Formats
M. C. Karakurt, “An investigation into rolling element bearing diagnostics via digital signal processing,” Middle East Technical University, 1989.
METU IIS - Integrated Information Service open@metu.edu.tr