Investigation of machining inaccuracies in turning

Download
008222.pdf
1990
Tükenmez, Mustafa
Show full item record
71
views
0
downloads
https://hdl.handle.net/11511/6259
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Investigation of fretting fatigue failure mechanism of lug-bush connection members
Ozen, Emine Burcin; Korkmaz, Yezdan; Çöker, Demirkan (2019-01-01)
Investigation of fretting fatigue failure mechanism of lug-bush connection members
Özen, Emine Burçin; Çöker, Demirkan (Elsevier BV; 2019-01-01)
Lug-bush connection members are widely used in aerospace industry, specifically in the connection of rotor to helicopter main body. Under small amplitude cyclic loadings, a fraction of the contact area experiences relative motion which causes fretting on the contacting surfaces. In this study, failure mechanisms of four different lug-bush members subjected to high cycle tensile fatigue loading are investigated. The contact surfaces are inspected using a digital microscope and a scanning electron microscope ...
Investigation of biogas production potential of three different sludges after thermal hydrolysis
Arı Akdemir, Ece.; Sanin, F. Dilek.; Department of Environmental Engineering (2019)
Biogas production through anaerobic digestion using biological sludge is one the sustainable approaches. Hydrolysis is the first and rate limiting step during anaerobic digestion. For enhancement of hydrolysis of sludge, it is feasible to investigate pre-treatment before anaerobic digestion process. In this research, biogas and methane production potentials of municipal wastewater treatment plants sludge, membrane bioreactor sludge and organized industrial district sludge were investigated using small scale...
Investigation of the effects of reuse on software quality inan industrial setting
Deniz, Berkhan; Bilgen, Semih; Department of Electrical and Electronics Engineering (2013)
Software reuse is a powerful tool in order to reduce development and maintenance time and cost. Any software life cycle product can be reused, not only fragments of source code. A high degree of reuse correlates with a low defect density. In the literature, many theoretical and empirical researches have examined the relationship of software reuse and quality. In this thesis, the effects of reuse on software quality are investigated in an industrial setting. Throughout this study, we worked with Turkey’s lea...
Investigation of the effects of Kayabaşı series capacitors on 380 kv Turkish power system
Tümer, Serdar; Özay, Nevzat; Department of Electrical and Electronics Engineering (1987)
Citation Formats
M. Tükenmez, “Investigation of machining inaccuracies in turning,” Middle East Technical University, 1990.
METU IIS - Integrated Information Service open@metu.edu.tr