Simulation and comparison of various control tyfes as applied to manipulators.

1990
Salamcı, Metim Uymaz
Show full item record
59
views
0
downloads
https://hdl.handle.net/11511/6266
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Simulation of thermal, mechanical and optical behavior of yag ceramics with increasing Nd3+ concentration under lasing conditions.
Kenar, Necmettin; Öke, Gülay; Department of Physics (2007)
Two-dimensional thermal, mechanical and optical simulations are carried out to investigate the effect of Nd3+ concentration on thermal, mechanical and optical behavior of Nd:YAG ceramic laser materials under continuous wave laser operation. In the analyses, rods are pumped longitudinally with laser diodes, in three, six, nine and twelve fold structures. Rods having diameters of 3 and 6 mm are pumped with 808 nm and 885 nm sources separately having Nd+3 concentrations of 0.6, 1, 2, 3, 4 and 6 at. %. Total ab...
Simulation of a noise spectral density comparison type correlation radiometer.
Ural , A Turgay; Department of Electrical Engineering (1968)
Simulation of the stepping stone model for polulation structure.
Turak, Ayse Suzan; Department of Biology (1992)
Simulation of capacity expansion and sequencing alternatives for a sheet metal producer
Arer, MM; Özdemirel, Nur Evin (Informa UK Limited, 1999-06-01)
We present a simulation case study carried out for a make-to-order aluminium sheet producer located in Istanbul, Turkey. We are concerned with a subsystem of the factory consisting of continuous casting, cold rolling, and annealing processes. Two simulation models are developed: (1) a combined model for studying the casting process only; (2) a discrete event model for comparing capacity expansion alternatives and order sequencing rules in the subsystem. Operational characteristics of the real system and pas...
Simulation of single stage reciprocating compressor systems on a digital computer.
Büyükmıhçı, Kemal; Department of Mechanical Engineering (1973)
Citation Formats
M. U. Salamcı, “Simulation and comparison of various control tyfes as applied to manipulators.,” Middle East Technical University, 1990.
METU IIS - Integrated Information Service open@metu.edu.tr