Loading policies in flexible manufacturing systems: A comparative study

Download
008204.pdf
1990
Tunaşar, Cenk
Show full item record
58
views
0
downloads
https://hdl.handle.net/11511/6328
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Loading of pallets on identical CNC machines with cyclic schedules
Kayaligil, S; Ozlu, S (2002-06-01)
Flexible manufacturing systems (FMS) are generally set up to process a wide variety of parts with low to medium volume demand. The loading problem in FMS is a short-term decision issue, which addresses the simultaneous processing of a set of different parts in an efficient manner on capital-intensive resources. This study focuses on cyclic schedules in loading pallets carrying groups of identical parts to CNC machining centers. A predefined stream of pallets fixtured for different part types is repeatedly s...
Loading Behaviours of Nickel, Cobalt and Scandium on Different Types of Resin
Altınsel, Yiğit; Altun, Naci Emre; Topkaya, Yavuz; Atalay, Mustafa Ümit; Kaya, Şerif (2017-06-01)
Importance of laterite nickel ores are increasing day by day because of their nickel, cobalt and scandium contents. Processing operations of laterite ores generally consist of scrubbing, high pressure acid leaching, solution purification, ion exchange chromatography, solvent extraction, precipitation, etc. Due to the high cost of processing operations; maximum amounts of nickel, cobalt and scandium extraction and recovery are essential. Thus, the use of ion...
Loading and release efficiencies of Bortezomib on chitosan coated magnetic nanoparticles
Unsoy, G.; Yalcin, S.; Khodadust, R.; Mutlu, Pelin; Pourianazar, N. Taghavi; Gündüz, Ufuk (2014-09-01)
Load curve classification for the evaluation of demand side management programs
Yumak, K.; Tosun, G.; Varlik, B.; Bağrıyanık, Mustafa (2016-09-25)
The demand side management of electrical power systems is an issue of growing concern. In this study, annual load curves those have been obtained by field measurements on MV (31.5kV) feeders in an electricity distribution company in Turkey have been studied. Feeders supplying different type of customers (Agricultural irrigation, Commercial & Industrial and Residential) are classified through Peak and Night Ratio for the assessment of convenient incentive or price based methods. Statistical parameters, such ...
Load analysis of an aircraft using simplified aerodynamic and structural models
Ünay, Emre; Kayran, Altan; Department of Aerospace Engineering (2015)
Aircraft must be light enough to fly but also strong enough to endure the loads they experience during flight. Designing such a structure is one of the most demanding works in an aircraft design project. In order to design such a structure, accurate evaluation of loads is important. Once the loads applied to the structure are calculated precisely, then the deflections and stresses can be calculated and sizing of the structures can be performed accordingly. Therefore, in aircraft design projects, loads group...
Citation Formats
C. Tunaşar, “Loading policies in flexible manufacturing systems: A comparative study,” Middle East Technical University, 1990.
METU IIS - Integrated Information Service open@metu.edu.tr