Design and construction of a medium-speed impact launcher

Download
012813.pdf
1991
Güngör, Teoman
Show full item record
131
views
0
downloads
https://hdl.handle.net/11511/6351
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Design and construction of a high speed static 3-phase distance protection relay.
Kanık, I Selah; Department of Electrical Engineering (1980)
Design and manufacturing of a high speed, jet powered target drone
Özyetiş, Ender; Alemdaroğlu, Hüseyin Nafiz; Department of Aerospace Engineering (2013)
This thesis presents the design and manufacturing of a high speed jet powered UAV which is capable of flying at M=0.5. Flight time of the UAV is 30 minutes at 1700 m above sea level. Aerodynamic and structural design of the UAV is conducted for 6g sustained and 9g instantaneous loads. Low aspect ratio blended wing-body design is decided due to low drag and high maneuverability. The Structure of the UAV consists of the composite parts such as frames and skin and mechanical parts such as landing gears which a...
Design and construction of an automatic blood pressure monitoring device.
Ilkdoğan, Haluk; Department of Electrical Engineering (1979)
Design and construction of reduced size planar spiral antenna in the 0.5-18 ghz frequency range
Yıldız, İnanç; Hızal, Altunkan; Department of Electrical and Electronics Engineering (2004)
In this thesis, theoretical and practical evaluation of usual spiral antenna is revised. Working principles of both types of planar spiral antennas as Equiangular and Archimedean are introduced. A predesigned microstrip tapered balun used for feeding section of a spiral antenna is simulated on Ansoft HFSS software. Successful simulation results are obtained and measurements of implemented balun structure are made by using an HP 8722 D vector network analyzer. Antenna measurement techniques used in this stud...
Design, development ,construction and experimental verification of a static tect stand for testing solid propellant rocket engines.
Keçe, Muharrem Murat; Department of Mechanical Engineering (1981)
Citation Formats
T. Güngör, “Design and construction of a medium-speed impact launcher,” Middle East Technical University, 1991.
METU IIS - Integrated Information Service open@metu.edu.tr