MODIFICATION OF ALUMINUM SILICON CAST ALLOYS BY RARE-EARTH ADDITION

1988-06-01
SELCUK, E

Suggestions

Modification of polypropylene films for antistatic and anti-scratch properties
Kürkçü, Pınar; Bayramlı, Erdal; Department of Polymer Science and Technology (2007)
Polypropylene films are widely used in industry, especially for packaging purposes. However, these films become statically charged when they are subject to friction. The accumulation of charges in some applications can be harmful, especially for the electronic devices and can cause undesirable appearance due to the attraction of dusts. Furthermore, minimum susceptibility to mechanically induced surface damage is a desired property since scratches reduce the mechanical strength and the bright texture of the ...
Modification of Acrylic Bone Cements with Oxygen Plasma and Additives
Endoğan Tanır, Tuğba; Kızıltay, Aysel; Hasırcı, Vasıf Nejat; Hasırcı, Nesrin (2012-09-01)
Acrylic bone cements which are commonly used for the fixation of orthopedic prostheses, were prepared at different formulations, by using either ground poly(methyl methacrylate) (PMMA) particles or homogeneously synthesized PMMA microspheres with application of plasma and addition of various ingredients in order to improve mechanical and thermal properties. PMMA powders having three different particle size (ground and sieved particles with 0-50 mu m (BC1 group, average particle size: 21 mu m) and 50-150 mu ...
Modification of calcium carbonate surfaces in natural gas plasma for their use in polypropylene composite systems
Öztürk, Serhat; Akovalı, Güneri; Department of Polymer Science and Technology (2006)
In this study calcium carbonate (CaCO3) particles are surface modified by using plasma polymerized natural gas and effects of surface modification of CaCO3 filler on mechanical properties of CaCO3-PP composites are investigated. Different combination of plasma factors; RF power, natural gas flow rate, and plasma discharge durations, are investigated. Mechanical properties such as tensile strength and Young’s Modulus are measured by tensile testing machine. Storage modulus and loss modulus measurements are d...
Modification of barium titanate for positive temperature coefficient of resistivity applications
Yılmaz, Hüseyin; Timuçin, Muharrem; Department of Metallurgical and Materials Engineering (1997)
Modification of TiO2 and NiO charge selective mesoporous layers using excessive Y and Li additions for carbon based perovskite solar cells
Icli, Kerem Cagatay; Özenbaş, Ahmet Macit (2021-09-15)
Carbon based perovskite solar cells are rapidly emerging as promising photovoltaic devices, combining low cost production and prolonged device operation, due to the exclusion of polymeric conductors and integration of highly durable metal oxide charge selective layers. Modification of metal oxide mesoporous layers via element additions and enhancement of electrical conductivity is a major strategy for reduced internal resistances inside the cell. This work investigates the effect of excessive Y and Li addit...
Citation Formats
E. SELCUK, “MODIFICATION OF ALUMINUM SILICON CAST ALLOYS BY RARE-EARTH ADDITION,” CIM BULLETIN, pp. 94–95, 1988, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/63512.