Rubber-pad froming: Design and construction of a bench-scale press and experimental investigation

Download

015538.pdf

Date

1991

Author

Dirikolu, M. Hüsnü

Metadata

Show full item record

Item Usage Stats

196
views

0
downloads

URI

https://hdl.handle.net/11511/6372

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Rubber toughening of phenolic resin by using nitrile rubber and amino silane Kaynak, Cevdet (2006-05-01) The aim of this study was to investigate rubber toughening of resol type phenol-formaldehyde resin. For this purpose, phenolic resin was first modified by acrylonitrile butadiene rubber alone, and then by using nitrite rubber together with 3-aminopropyltriethoxysilane. Test specimens were prepared by mixing and casting of liquid phenolic resin in three groups. In the first one, neat phenolic resin specimens were produced. In the second group, phenolic resin was modified with 0.5, 1, 2, and 3 wt% nitrile rub...
Rubber toughening of phenolic resin by using nitrile rubber and amino silane Çağatay, Onur; Kaynak, Cevdet; Department of Metallurgical and Materials Engineering (2005) The aim of this study was to investigate rubber toughening of resol type phenol-formaldehyde resin. For this purpose, phenolic resin was first modified by only acrylonitrile butadiene rubber, and then by using nitrile rubber together with 3-aminopropyltriethoxysilane. Test specimens were prepared by mixing and casting of liquid phenolic resin in three groups. In the first one, neat phenolic resin specimens were produced. In the second group, phenolic resin was modified with 0.5, 1, 2, and 3 wt.% nitrile rub...
Wax deposition in horizontal wellbores Özbayoğlu, Mehmet Evren; Demiral, Birol; Kök, Mustafa Verşan; Department of Petroleum and Natural Gas Engineering (1998)
Cement stabilization of consolidated tuff. Ersoy, Gürkan; Department of Civil Engineering (1971)
Steel stringer bridge load rating based on field calibrated grid models Türer, Ahmet (2006-07-19)

Citation Formats

M. H. Dirikolu, “Rubber-pad froming: Design and construction of a bench-scale press and experimental investigation,” Middle East Technical University, 1991.