Load transfer problem in single lap joint

Download
016777.pdf
1991
Poyraz, Hamit
Show full item record
91
views
0
downloads
https://hdl.handle.net/11511/6383
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Load Torque Estimation for Spindle Drives Using Structured Neural Network Topologies
Dölen, Melik; Lorenz, Robert (null; 2001-11-07)
Load Reduction in Wind Turbines with Bend-Twist CoupledBlades without Power Loss at Underrated Wind Speeds
Atalay, Oğuz; Kayran, Altan (null; 2018-01-01)
Usage of composite materials in wind turbine blades is a passive mechanism to alleviate fatigue loads besides the reduction in the mass of the wind turbine system. Off-axis plies in bend-twist coupled (BTC) blades account for the passive fatigue load reduction by reducing the effective angle of attack of blade sections. Reduction in fatigue loads is generally represented by damage equivalent load ratios. In the present study, multibody aeroelastic analyses are performed for wind turbine systems for the unde...
Pressure distribution and downpull force on vertical gate lips
Telci, İlker Tonguç; Aydın, İsmail; Department of Civil Engineering (2002)
Weight function for a single edge cracked geometry with clamped ends
John, Reji; Kaldon, Stephen G.; Johnson, David A.; Çöker, Demirkan (1985-08-01)
A single edge cracked geometry with clamped ends is well suited for fracture toughness and fatigue crack growth testing of composites and thin materials. Analysis of fiber bridging phenomenon in the composites and determination of stress intensity factors due to non-uniform stress distributions such as residual and thermal stresses generally require the use of a weight function. This paper describes the development and verification of a weight function for the single edge cracked geometry with clamped ends....
Stress behavioursof viscoelastic flowaround square cylinder
Tezel Tanrısever, Güler Bengüsu; Yapıcı, Kerim; Uludağ, Yusuf (2019-06-01)
In this study, it is aimed the numerically investigation of the flow of liner PTT (Phan-Thien-Tanner) fluid, which is a viscoelastic fluid model over limited square obstacle by finite volume method. The finite volume method has been used for simultaneous solution of continuity, momentum and fluid model equations with appropriate boundary conditions. The effects of the inertia in terms of Reynolds number, Re, (0 < Re < 20) and the of elasticity in terms of Weissenberg number, We, (1 < We < 15) of PTT flow ...
Citation Formats
H. Poyraz, “Load transfer problem in single lap joint,” Middle East Technical University, 1991.
METU IIS - Integrated Information Service open@metu.edu.tr